Active Member
|
[China]
Address: Room 1714, No105, Haifeng Road, Jimei District, Xiamen, Fujian, China
Contact name:Paul Ma
Xiamen David Stone Co., Ltd. |
|
|
G561 granite wall cladding burned direct from factory with quarry low price
Red Crabapple granite has its mines at CenXi Guangxi Province
China, the color and lustre is elegant, the color is stable with
big sparkle flower, famous with its high yield, and the surface of
the plate is like maple leaf after polishing, so it is called
"small maple granite"
Product types:
Slab, plate, sheet, strip and gross domestic dry hanging plate
works, export specifications board, road side stone, profiled
processing in different shapes according to customized designs,
etc.
Processing technology:
polishing, matt(sublight), steel brush surface, burning surface,
litchi noodle, natural surface, drawing surface, sandblasting
surface, mushroom surface, pineapple surface etc
Plate Specification
1. dimensions: 300 x 300mm 305 x 305mm 400 x 400mm 457 x 457mm 600
x 600mm or other specified specifications
2. dimensional tolerance: quadrilateral 10mm diagonal + 10mm
3. thickness: 10mm 12mm 15mm 18mm 20mm 25mm 30mm and other
specified thickness
Plate QC:
A. Thickness tolerance: + 0.5mm + 1mm +
1.5mm + 2mm
B. Color: for the same ore export blocks,
the same color plate product.
C. Plate surface: no defects, such as
black gallbladder, crack, ray, yin and Yang, stain, angle and so
on.
D. Processing: the horizontal
section is smooth and straight, without burr, disintegration and
angle missing angle and so on.
Strip sizes: 60 heads, 70 heads, 80 heads and other sizes
Strip quality control:
a. Width: 60 headboard selection more than 63cm, 70
headboard selection 73cm above, this analogy.
b. Color: the same ore mouth, uniform color.
c. Plate surface: plate surface pattern, color
consistent, no black bile, cracks, rays, yin and Yang, pit pit and
other obvious defects.
d. Flatness: the flatness of the plate is not more
than 0.5mm
e. Glossiness: the polishing mask has a mirror gloss,
which can clearly reflect the scene, and the gloss is not less than
80.
Physical property:
Granite type | red crabapple granite G561 |
Density | 2.65g/cm3 |
Flexural strength | 13.4Mpa |
Compressive strength | 126Mpa |
Water absorption rate | 0.26% |
Impurity | 0.01% |
Applicaton | wall cladding |
Granite wall cladding packing:
40-50pcs / crates, 18-20 crates / 1*20'FCL, Maximum loading 27 tons
Factory corner
More photo of granite wall cladding
Project of Red Crabapple granite wall cladding
Dry hanging process of granite wall cladding
Clean up the grass roots, no pollutants at the grass-roots level.
Line: from both ends of the wall surface, from top to bottom up vertical lines, points on the ground or fixed point, find the vertical, generally according to the gap with the base board back (i.e. overhead layer) is appropriate for the 50~70mm, according to a vertical line up, connecting two points as the starting layer hanging plate base according to the elevation, base plate size and the width of gap pop-up vertical horizontal grid line.
Plate drilling: according to the design requirements in two to end the drilling location, pre concentrated marking, drilling, hole aperture is 5mm, Shenyi 30mm, vertical hole and end face of the vertical line.
4. Pendant mounting: according to the design and release Moxian
pendant pendant specifications and quantity requirements, at the
same time to force plate detection expansion bolts and connecting
nut screwing efforts, so as to meet the design requirements of the
quality.
5.In the end plate connection: plate hole, filled with epoxy resin
mixture amount and insert the anchor pin, with epoxy resin mixture
to ensure proper solidification time than, should be as specific
and appropriate, generally in 4~8 hours, to avoid premature
solidification and embrittlement, slow solidification and loose.
6.Plate installation: usually start viewing main or main facade,
from top to bottom in turn a direction in order to install, to
avoid cross operation to reduce the deviation, and pay attention to
the consistency of color plates, each layer should be installed, a
shape error correction, and to force plate on hand close the bolt
fastening force pendant for sampling reinspection.
7.Sealing: after every construction section is installed, it can be
cleaned without any mistake. It can clean up the seams, fill in the
rubber strips, and then use the glue machine to do the silica gel
sealant. The general silica gel only seals the surface of the flat
joints or slightly concave than the boards. It is not suitable to
apply silica gel when wet or sheet is dampened.
8.Cleaning: the operation site should be cleaned at the end of each
operation, and the installation is not allowed to leave the
sundries, so as to prevent the hardship from falling to the broken
panel.
G561 Crapabble granite quarry corner
