Main technical parameters and requirements in production line
|Type|| 3 layer corrugated paperboard production line|
|MAX. Production width||1800mm|
| || |
Note: The line speed test paper shall meet the following
requirements :( device surface temperature not lower than 172 ℃
﹡base Paper grade not lower than B grade ﹡Paper moisture content of
﹡top paper:100—250g/m2 ﹡core paper:100--250g/m2
1.Flute type combination:A ,C, B, E(Or managed by the customer)
2.Steam necessary requirements:
3.﹡Amount of steam2500—3000Kg/Hr
4. ﹡Maximum pressure:1.2Mpa
6,Power supply:380V 50Hz Three-phase four-wire
7,The total installed power equipment:about
200KW Actual consumption: about 150KW (full speed)
8,Equipment area: about 52m × 10m × 5m (specific
length foundation figure date)
9,Equipment Ejection direction: According to user
plant to determine the drive left-or right position
10,Equipment suitability, available A, B, C class domestic or
imported raw paper base paper
1, Steam heating system:proposal
with 4000Kg / Hr of a steam boiler pressure:1.25Mpa steam pipeline.
2, Air compressed machine,air
pipeline,glue conveying pipe.
3, Power supply,wires connected to the
operation panel and line pipe.
4, Water sources,water pipelines,buckets
and so on.
5, Water, electricity, gas flush
mounting civil foundation.
6, Test with the base paper,corn starch
(potato),Industrial use caustic soda,borax and other material.
7, Oil equipment,lubricating
oil,hydraulic oil,lubricating grease.
8, Installation,commissioning of food,
accommodation.And provide installers with the installation.