Gaoge-Tech Instrument Co., Ltd. |
|
Green Car Power Battery Tester - Safety Crush and Needling Test
1.Description
Power battery crush and puncture test machine have up to
50KN-5000KN pressure, Driving a large stroke cylinder by an
independent hydraulic system, oil cylinder drives the extruding
plate to do the test of the extruding and deformation of the
battery. The test panel can be adjusted up and down slightly to
obtain the best test position.
It could do both piercing and extrusion and can provide different
extrusion deformation and duration according to the set program.
In the work, the corresponding program can be selected according to
the purpose of the test, and get the test date you need.
Through real-time test data ( battery voltage, max, battery
temperature, pressure voltage data) to test battery safety
performance by crushing & nail-penetration and judge test
result on the condition of no flame, smoke, explosion after test.
2.Specifications
Model | GAG-H211-5T | GAG-H211-20T | GAG-H211-50T | GAG-H211-80T | GAG-H211-100T | GAG-H211-500T |
Max. Pressure(KN) | 50KN | 200KN | 500KN | 800KN | 1000KN | 5000KN |
Oil pressure stroke(mm) | 500 | 800 | 1000 | 1000 | 3000 | 3000 |
Application of battery | Single battery cell or joint battery cell package(not applicable 3C battery cell) | |||||
Equipment Weight | ≈2.5T | ≈2.8T | ≈3.0T | ≈3.2T | ≈3.5T | ≈3.5T |
Crush/Nail-penetrate space H*W*D(cm) | 50*50*50 | 80*80*80 | 60*60*100 | 200*200*80 | 300*200*100 | 300*200*100 |
Nail-penetrate Speed | 1~ 50mm/s (adjustable) | |||||
Crush Speed | 1mm/s-500mm/m(adjustable) | |||||
Displacement control Speed | 0-25mm/s (Automatic speed regulation of proportional valve) | 0-45mm/s(Automatic speed regulation of proportional valve) | ||||
Temp.Sampling Range | 0 ~ 1200ºC | |||||
Voltage Accuracy | ±1%FS | |||||
Temp. Resolution | 0.1ºC | |||||
Crush/Nail-penetrate Accuracy | ±1% | |||||
Displacement control Accuracy | ±1% | |||||
Structure | horizontal | |||||
Crush/Nail-penetrate Remaining Time | 0~99 hours 99mins 99secs | |||||
Driven Method | Hydraulic | |||||
High Temp. Resistant Steel Needles | Diameter φ5mm~φ8mm(for battery cell); Diameter φ6mm~φ10mm(for modular experiment) | |||||
Control Method | PLC Touch Screen & Computer Remote Control | |||||
Safety Alarm Device | Electric leakage, Over temperature, Over voltage, Over loading, Over current protection,abnormal sound light alarm,smoke alarm etc. | |||||
Safety Device | Camera monitoring system,Fire-extinguishing system,Explosion-proof system,Smoke evacuation system,Explosion-proof lighting devices etc. | |||||
Power | AC380V | |||||
Customized service | Welcome to Non-standard, Special requirements, OEM/ODM orders. |
3.Features
1. The wire coat is covered with metal fire tube which can
effectively prevent the wire from burning caused by the ignition
during the battery test;
2. It is equipped with a lighting lamp so that you can clearly see
the status inside the test chamber
3. The acupuncture/squeeze speed (10~80mm/s) can be adjusted at
will;
4. The acupuncture/squeeze force value (1KN~15KN) can be set at
will, meeting different standard requirements;
5. Equipped with a test hole and two additional air outlets; the
additional air outlets and the exhaust fan can more effectively and
quickly exhaust the test waste gas and air pressure; the test hole
is designed to detect the temperature or air pressure inside the
test space;
6. The controller, isolated from the test chamber, can be operated
1~2 meters away, which can provide a certain safety measure.
4.Standard
GB/T 31467.3-2015,GB/T 31485-2015,GB 31241-2014,GB/T 18287
-2013,GB/T 8897.4-2008,YD/T 2344.1-2011,GB/T 21966-2008,MT/T
1051-2007,YD 1268-2003,GB/T 19521.11-2005,YDB 032-2009,UL
1642:2012,UL 2054: 2012,UN38.3(2012),IEC62133-2012,
IEC 62281: 2004,IEC 60086: 2007,GB/T 18332.2-2001 , MT/T 1051-2007,
etc
Corporte partners
Company Certification
Company profile
Service Process
Free Pre-Sales Consulting |
20 Days Quick Delivery |
1 Year Quality Guarantee |
12 hours Quick Feedback & After-Sales Service |
Quick Back-up Parts Available & Technical Assistance |
Free Training Service |
Special Designing, Customized, OEM Order is accepted |
16.Packaging & Shipping
1.Inside is covered with plastic film before we put them into the
plywood, which has good transparency, impact resistance, tasteless
and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.