Clamps Holding ISTA Testing Machine F Clamp 1000mm Bags Packaging
Carton Clamp Testing
Description
The machine simulates the process the Schnabel car discharge the
package, during this process, the clamping force of both boards
will affect the package and cargo. And this test is to evaluate the
resistance property of the package toward this clamping force.
Specifications
Specimen shape | Parallelepiped transport package |
Maximum specimen weight | 600kg |
Clamping pressure force | According to the transport diagram on the test sample, the operator
can add 400-3000Lb (adjustable) pressure force on the corresponding
surface. |
Clamping plate size | Height 48inch X depth 48inch |
Clamping plate adjustable height | 0~1000mm |
Base plate dimension | 2200 X 2100mm |
Motor | Panasonic Servo Motor |
Accuracy | within ±5% |
Clamping plate requirement | Make the two clamping boards flat and non-deform under work
condition (2000 Pounds) and make clamping boards' parallel and
clamping board and land vertical. Clamping board is thicker than
25mm. |
Clamping force rate | 0.25-2.5mm/sec (according ISTA 6- SAMS CLUB) |
Force corrector | It displays force value and is used to calibrate clamping force. |
Calibration accuracy | ±1% F.S |
Device width | Less than 2.5m |
Weight | approx. 2000kg |
Power | 220v/ 60Hz |
Controller: | touch screen type, which can control & display the speed and
force |
Function | the clamp can be up and down |
Control | Computer controlled type |
Features
1. Strength test:
Strength test which belongs to a destructive test is mainly used to
measure the deformation when The sample is loaded with maximum
pressure or crushing strength.
2. Constant Value Test:
There are two parameters which are to be set to the constant value
test: Load force value and Deformation value. The user can set one
or both of them according to the practical requirement; The
Measurement is complete when any parameter reaches the set value.
3. Stacking Test:
Stacking Test is used to check up that whether the sample can
endure a constant pressure in a given Time period. Set up two
parameters: Compressive strength and testing time (hour. When the
test Starts, the system will check the current pressure at any
moment to ensure the set value; The measure is complete when
the test time is expired or the deformation value exceeds the set
one Within testing time.
4. The overall system is in good parallelism, stationary and high
return speed.
Standard
TAPPI-T804, JIS-20212, GB4857.3.4, ASTM-D642
Applicable Industries
Corrugated board boxes and Cartons, Plastic Packaging, Wooden box.