Gaoge-Tech Instrument Co., Ltd. |
|
Automatic Rubber DIN Abrasion Tester Materials Fatigue Resistance Testing
Description
Professional DIN Abrasion Wear Resistance Tester is to test the
friction of a surface by a particular piece
of sandpaper, After friction for a certain time, and then assess
the condition of material surface weight, volume, and thickness,
from this standard to assess the abrasive nature of
materials.
Specifications
Test-arm weight | 250 ± 5 (g). |
Testing Load | 2.5N, 7.5N. |
Diameter abrasive wheel | dia 150 ± 450L (mm). |
emery cloth | 60 #, 425 ±473 ±1.5 (mm). |
Wheel Speed | 40 ± 1RPM. |
Shift screw | 6 teeth / inch. |
Limit rotation | 85 rotate |
Set rotation | 84 rotate (about 40M) |
Return form | Electric automatic reset |
Drive Power | 40W; 1 / 30. |
Power | 220V 50HZ. |
Machine Dimensions | 600 ±330 ±420 (mm). |
Technical parameters | |
dler | 150mm |
abrasion stroke | 40 ± 0.2M |
Horizontal displacement | 4.2mm / rotate |
stroke | 20m/40m presetting |
grips lateral displacement | 4.2 ± 0.04rpm |
Idler wheel speed | 40 ± 1cpm |
Measuring way | Auto/Manual presetting |
load | 2.5 ± 0.1N,5 ± 0.1N,10 ± 0.1N |
Specimen size | dia 16mm, thickness at least 6mm |
Emery cloth Specification | 60 #, seam is less than 2mm |
sand paper | 60 Germany |
Dimension | 95*66*31cm |
Features
With a small sample, save time, friction way of non-repetition, low noise, high efficiency, good reproducibility and easy to operate and so on.
Standard
DIN-53516, ISO/DIS-4649, GB-9867 SATRA TM174 BS903 JIS K6264