Compatible JNP-QSFP-100G-BXSR 100GBASE-BXSR OM4 100m 850nm 70C MMF Optical Module

Compatible Juniper JNP-QSFP-100G-BXSR 100GBASE-BXSR OM4 100m 850nm 70C MMF Optical Module

The 100-Gbps BXSR transceiver uses two bi-directional transmitter/receivers, each supporting 50 Gbps (25Gbd PAM4), over two multi-mode fiber strands (duplex multi-mode cable). The left LC receptacle transmits at a nominal wavelengths of 850 nm, and receives at a nominal wavelength of 900 nm. The right LC receptacle transmits at a nominal wavelengths of 900 nm, and receives at a nominal wavelength of 850 nm. Standard OM3/OM4 MMF patch cords can be used to interconnect 100-Gbps BXSR transceiver.

Product Feature:

Optic Type (Commercial Vs Service Provider Grade)MMF

NEBs (Yes or No)Yes

Signaling rate, each lane25.78125Gbd PAM4 (51.5625 Gbps)Transmitter wavelengths (range)
Wavelength 1: 847nm to 863nm
Wavelength 2: 900nm to 916 nm
Receive lane wavelengths (range)
Wavelength 1: 847nm to 863nm
Wavelength 2: 900nm to 916 nm
Transmitter RMS spectral width (maximum)0.59 nm

Transmitter output power, each lane (minimum)-6.0 dBm

Transmitter output power, each lane (maximum)4.0 dBm

Receiver input power, each lane (minimum)-7.9 dBm

Receiver input power, each lane (maximum)+4.0 dBm

Receiver sensitivity (OMA), each lane (maximum)+3.5 dBm

Stressed receiver sensitivity (OMA) each lane (maximum)-3.0 dBm

Cable typeMMF

Fiber gradeOM3OM4

Effective modal bandwidth2000 MHz x km4700 MHz x km

Distance70 m100 m

Maximum Power consumption (W)3.5 W

Operating Temperature (range)0° C to 70° C

Storage temperature–40° C to 85° C

Typical Weight & Dimensions
Typically weigh: 100 grams
Dimensions(H x W x D): 13.5 x 18.4 x 72.4 mm