Single Column Plane Milling Machine , Performance Horizontal Milling Machine

X33, X34 series and double column flat milling (boring) bed Brief introduction of technology and configuration

First, performance characteristics

1. spindle for gear transmission, milling head has a built-in flywheel, cutting is more stable.

2., the milling head moves up and down on the column, and the working feed of the worktable is stepless speed regulation by frequency conversion, which is conducive to selecting reasonable cutting parameters and using it conveniently.

The new technology of wear resistant and plastic guide rail is adopted in the worktable above 3.X338, which can reduce the wear of the bed guide.

The 4. bed adopts special piston pump lubrication, the screw rod of the work table adopt oil lubrication; milling head adopts independent plunger pump lubrication, the machine has good lubricating performance.

The 5. bed adopts ultrasonic frequency quenching; spindle box transmission gear for 20CrMnTi after carburizing and quenching and grinding; spindle adopts 40Cr conditioning cone and end using salt bath quenching.

6. through the touch screen with servo control mode and the travel itinerary with 300 boring and milling head, so that the machine has a simple programming function of the machine tool can be a single column automatic milling machine, but also increase the automatic cycle milling function of the plane processing.

7. optional 300 stroke milling head and servo control can be installed at the right angle milling head or universal angle milling head milling head; optional rotary milling head, which can be down to +45 degrees, the rise of -10 degrees; optional cooling system; optional three edge milling cutter rod support tailstock to machine technology to expand the scope of.

Two. The list of random accessories (free delivery with the host)

1. milling rod

2. band end cutter end milling cutter

3. milling cutter location core shaft

4. moth cone transition sleeve

5. foot screw complete set

6. machine tool pad iron complete set

Three. For special configuration or accessories (selected on a business contract)

1. angle milling head (NO40 7:24 or 4# Morse taper of spindle)

2. two coordinate digital display

3. column guide guideway organ type shield (up and down)

Four. Manufacturing standards

Host acceptance criteria: supplier qualification certificate (reference standard JB/T3313.3-1999).

Five. Random technical documents and provision

1. using 1 sets of instructions (machinery and electrical appliances)

2. certificate of qualification 1

3. packing list 1 sets

4. maintenance parts catalogue 1 sets

5. sets of foreign purchases, import pieces and 1 sets of information

6. after the contract is effective (half a month), the general layout of the machine tool is provided and the construction foundation map with the seal of the supplier's technical department is covered. 1 copies of each