Jiangsu Qiangli Machinery Co.,Ltd |
|
4 axis hydraulic stainless steel plate sheet rolling plate forming machine
Bending Machine SPecification
Model&spec. | W24S-6 | W24S-16 | W24S-30 | W24S-45 | W24S-75 | W24S-100 | W24S-140 | |
Max bending modulus of section (cm3) | 6 | 16 | 30 | 45 | 75 | 100 | 140 | |
Bending speed(m/min) | 5.5 | 5.5 | 5.5 | 5.5 | 5 | 5 | 5 | |
yield limit of material (MPa) | 245 | 245 | 245 | 245 | 245 | 245 | 245 | |
inward bending of angle steel | The max cross section (mm) | 50×5 | 80×8 | 90×10 | 100×10 | 120×12 | 140×16 | 150×16 |
The min bending diameter (mm) | 800 | 1000 | 1200 | 1500 | 2000 | 2500 | 2400 | |
The min cross section (mm) | 20×3 | 30×3 | 35×3 | 36×5 | 38×4 | 40×5 | 50×5 | |
The min bending diameter (mm) | 400 | 550 | 560 | 600 | 600 | 720 | 1000 | |
outward bending of angle steel | The max cross section (mm) | 50×5 | 80×8 | 90×10 | 100×10 | 120×12 | 140×16 | 150×16 |
The min bending diameter (mm) | 800 | 1000 | 1100 | 1300 | 1600 | 1800 | 2200 | |
The min cross section (mm) | 20×3 | 30×3 | 35×3 | 36×5 | 38×4 | 45×5 | 50×5 | |
The min bending diameter (mm) | 400 | 550 | 500 | 600 | 700 | 760 | 400 | |
outward bending of channel steel | channel steel model | 8 | 12 | 16 | 20 | 25 | 28 | 30 |
The min bending diameter (mm) | 600 | 800 | 800 | 1000 | 1100 | 1100 | 1200 | |
inward bending of channel steel | channel steel model | 8 | 12 | 16 | 20 | 25 | 28 | 30 |
The min bending radius (mm) | 700 | 900 | 1000 | 1150 | 1600 | 1700 | 1700 | |
plane bending of flat steel | The max cross section (mm) | 100×18 | 150×25 | 180×25 | 200×30 | 220×40 | 250×40 | 280×50 |
The min bending diameter (mm) | 600 | 700 | 800 | 900 | 1000 | 1200 | 1300 | |
vertical bending of flat steel | The max cross section (mm) | 50×12 | 75×16 | 90×20 | 100×25 | 110×40 | 120×40 | 150×40 |
The min bending diameter (mm) | 500 | 760 | 800 | 1000 | 1100 | 1300 | 1500 | |
bending of round pipe | The max cross section (mm) | 42×4 | 76×4.5 | 89×5 | 89×8 | 114×5 | 159×5 | 168×6 |
The min bending diameter (mm) | 500 | 750 | 900 | 900 | 1200 | 2000 | 2000 | |
bending of round bar | The max cross section (mm) | 38 | 52 | 62 | 75 | 85 | 90 | 100 |
The min bending diameter (mm) | 450 | 600 | 600 | 800 | 100 | 1100 | 1200 | |
bending of square pipe | The max cross section (mm) | 45×3 | 60×4 | 70×4 | 80×6 | 90×8 | 100×10 | 125×10 |
The min bending diameter (mm) | 750 | 900 | 1000 | 1200 | 1600 | 2000 | 2500 |
Bending Machine Features
Rolls are hardened & made from high quality steel
Drive shafts are hardened and ground with double taper roller
bearing support
Machine can be set up in horizontal or vertical working position
Roving foot pedal control with emergency stop
Hydraulic lateral angle guide rolls
Three rollers are powered . European quality. Can be used in both
vertical and horizontal position
Compared with other machines. Advantages of the machine.
Perfectly complete pre-bending,rolled-up.Working principle: two
down rollers as main driving roller.Triple geared drive,low voltage
driver,low current consumption and high efficiency.
The two touch steel stick can permit the good finishing quality of
asymmetric plate section bending.NC syterm,advanced and compact
structure with full function.
The machine has six oil tanks(two big oil tanks,four small oil
tanks),and the head is vertically.The yield strength bended profile
with 320Mpa (Max.)
Both Horizontal and Vertical Working Positions.Double pinch
hydraulic forming rolls.Hardened precision threadedx shafts.Dual
adjustable lateral guidesRolls are driven via 3 separate hydraulic
motorLower rolls hydraulic moveable up and down.
Perfectly complete pre-bending,rolled-up,roll calibrate.Working
principle: two down rollers as main driving roller,or all three
rollers as main driving roller,with upper roller fixed and two down
rollers do up-and-town movement around one fixed center.
Triple geared drive,low voltage driver,low current consumption and
high efficiency.Well hydraulic control,displacement liquid-crystal
display with accuracy+_0.1mm.
Advanced technology
The two touch steel stick can permit the good finishing quality of
asymmetric plate section bending.Advanced and compact structure
with full function.
The machine has six oil tanks(two big oil tanks,four small oil
tanks),and the head is vertically.The yield strength bended profile
with 250Mpa (Max.).Full function,complicated structure,high
precision and very stronger.
Packaging Details
Wrapped by plastic films and fixed by steel wires in the containers
Delivery Time
30 days