|
[China]
Trade Verify
Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China
Contact name:Kelly
Dongguan Haida Equipment Co.,LTD |
|
Verified Suppliers
|
|
|
Single Phase Furniture Testing Machines , Sofa Durability Testing Equipment
Product description:
Seat, back and arm rest of sofa durability testing equipment property test mainly test durability of seat, back and arm rest.
Using certain shape and load modules, with specific form, frequency, respectively, repeating load seating to test backrest and armrest.
Seat, back and arm rest of sofa durability testing equipment test method is to simulate the daily use condition, to inspection sofa durability under long-term repeatability load capacity.
Main technical parameters:
| Item | Specification |
Seat load | 750 N |
| Backrest load | 400 N |
| Test cycle | 25,000 times to 200,000 times |
| Pressure sensor accuracy | 0.3%. Each force point is equipped with a pressure sensor to read the pressure value. |
| Full range control panel | Programmable controller + color display touch screen |
| Maximum size of test piece | (L × W × H) 2200 × 1200 × 1200mm |
| Machine weight | 400kg |
| Power source | 1∮, AC220V, 50Hz |
| Compressed air | 7kg / cm2 |
| It can simulate the durability and service life of the sofa and different parts such as the seat back and armrests, and can perform the alternating durability test on the seat surface, backrest and armrests of the sofa. | |
1. The seat, backrest and armrest of the sofa durability test
equipment can test the seat separately, test the backrest and
armrest separately or perform continuous test.
2. Two sets of cylinders are used for back thrust test, each group
has a thrust force sensor, and the force can be set.
3. Two sets of oil cylinders for armrest test, each with a thrust
force sensor, the force can be set.
4. The main control interface of the color touch screen, different
test conditions and abnormal parameter settings are simple and
convenient.
5. Pressure sensor accuracy ± 0.3% FS
6. Compressed air is required and the pressure is 7kg / cm2.
7. Power supply 220V, single phase
8. Standard: QB / T1952.1-2003
