|
[China]
Trade Verify
Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China
Contact name:Kelly
Dongguan Haida Equipment Co.,LTD |
|
Verified Suppliers
|
|
|
100 Degree Rotary Strollers Testing Machine For Baby Stroller Test
Testing purposes:
the dynamic, the infant carrier or seat fixed on the frame of the device must not break down, loose or may not have any damage in the test or test.
100 Degree Rotary Table Strollers Testing Machine With Digital Angle Display
| Design standards | EN1888 |
| Control modes | manual control |
| Test surface material | P-60 sandpaper |
| Angle Modulation | Motor |
| Angle Display | Digital |
| Angle Accuracy Tolerance | <1 degree |
| Maximum weight | 100KG |
| Angle | 0 ° - 20 ° |
Test status:
Basket or seat mounted on the frame. Operation basket or seat fixed
on the frame 200 fixtures.
Load block A on the basket at the bottom of the class 0 car seat,
or the B load block on the seat inside or F load block on the 0 +
class car seat and fasten it to the center.
If the car bed design can carry more than one child using multiple
test load placed on each one in each child take a regional.
Wheel or axle wagon is fixed in a rigid platform, this platform
around the axis parallel to the ground.
Slowly accompanied by the test load car clockwise and
counterclockwise rotation of 100 degrees to enable the fixtures to
test load transferred to the frame. Test steps:
1, the test weight is placed on the baby inside the car, the four
wheels of the stroller on the table;
2, manually wheel turn in the same direction 100 °, back in situ,
and then reverse direction to turn 100
degree;
3. Observe the testing process, with the changes of position by force, strollers parts of the force to tear cause damage.
