Active Member
|
[China]
Address: No.1008, ZengChai Road 54, Baiyun District, Guangzhou, China
Contact name:Winsom
Guangzhou Hedsom Building Material Co., Ltd |
|
|
high loading capacity anti static HPL finish covering Calcium sulphate access raised floor
Calcium sulphate access floor with HPL covering
Product discription
Calcium sulphate anti-static raised access floor panel is made of high-strength calcium sulphate core. The top surface is stuck with High Pressure Laminate (HPL) or PVC or ceramic, the bottom is covered with aluminum foil or galvanized steel sheet. Four edges are sealed with black ABS edge trim.
Product advantages:
1. High loading capacity, and conductivity.
2. Calcium sulphate core, non combustible
3. High evenness and dimensional accuracy, and good interchangeability.
3. Good sealing and acoustic,
4. Keep stable in different temperature and humidity.
5. Environment friendly and free of pollution.
Technical data of steel anti-static access floor
| NO. | Size | Thickness | Concentrated load (deflection=2mm) | Ultimate load | Uniform load | Rolling load | Electrical resistance | ||||
| (mm) | (mm) | lb | N | kg | N | N/m2 | N | deflection | Permanent deformation | (Ω) | |
| PRT-W800 | 600×600 | 32 | 800 | 3550 | 363 | 10650 | 16500 | 2950 | ≤2mm | ≤0.5mm | 106 - 1010 |
| 40 | |||||||||||
| PRT-W1000 | 600×600 | 32 | 1000 | 4450 | 454 | 13350 | 23000 | 3560 | 106 - 1010 | ||
| 40 | |||||||||||
| PRT-W1250 | 600×600 | 32 | 1250 | 5560 | 567 | 16680 | 33000 | 4450 | 106 - 1010 | ||
| 600×600 | 40 | ||||||||||
| CICAS or BS standard size panel | Parete can provide the size 24’’ ×24’’ (610mm×610mm) access floor panel. | ||||||||||
| Floor covering | HPL, PVC or Ceramic tile (Page 18-21) | ||||||||||
| Raised height | Normally from 100mm to 1000mm, above 1000mm, it should be in special solution. | ||||||||||
| Electrical resistance | It will be 104-106 When use the PVC coverings. | ||||||||||
Calcium Sulphate Core production
Flue-gas desulfurization (FGD) is mixed with fiber (recycled paper and some glass fiber, natural gypsum, and water. There will be mixed in a tank, then the slurry will be spay to a forming module and compress to a density.
Their sizes is bigger than the access floor panel, for they should be cut in the four edges to a angle about 84 degree before stick the electrostatic conductive PVC edge.
After formed in a module, they will be sent to the baking to dry in a set humidity and temperature. The panels will be stayed in the oven about 12 hours to a very stale status.
Then they will be transferred to the polishing line to sand to the required thickness and cut to the size according to the order. These are the law material of the calcium sulphate raised access floor panel.
During the transfer or transportation, the edges or corners should be protected well to avoid the breakage.
All the waste or dust of cutting and sanding should be collected to recycle in the next production.
HPL covering
After using a variety of special paper phenolic, melamine, resin processing, high temperature and pressure made of thermosetting resin decorative laminates. It is not only bright color, bright and smooth, and has a wear-resistant, heat resistance, pollution, washable and permanent decorative features, the standard thickness of 0.8mm, 1.0mm, 1.2mm, 1.5mm, the thickness can development of user requirements.
High pressure melamine laminate is widely used in varies computer rooms and data centers. It is anti-static, anti-wear and free of pollution. It is anti scratch and wear resistance. It is economical and easy glued on the surface of metal, calcium sulphate panel and wood core surface. So it is the most welcome floor covering.
Applications
Calcium sulphate anti-static raised access floor is used in the areas that have high standard in antistatic, loading capacity, fire resistance, good evenness and appearance. For example, computer room of bank, cabinet room of telecom, intelligent office, control center of military, and other high standard computer room.
Industry | areas |
manufacture | Electronic factory, transformer substation, hydropower, oil tank, cement factory, motor industry etc. |
financial | Bank, security, telecom, insurance |
Commercial | Hotel, Shopping mall, intelligent office, logistic center |
Government | School, tax bureau, police station, frontier inspection station, national defense center, industrial and commercial bureau, custom, national conference center etc. |
Public facility | Hospital, military, highway, airport, TV station, radio and TV center |
Some of the Project References List
| Project name | Model/Panel Size (mm) | Thickness | Core Material | Area(m*m) | Application Field |
| Guangzhou Baiyun Airport | FS1000 600*600 | 35mm | Steel infill with cement | 13000 | Office,Control Center,Server Room |
| Guangzhou International Financial Center | FS1000 600*600 | 35mm | Steel infill with cement | 22500 | Office |
| Guangzhou Opera House | FS1000 600*600 | 35mm | Steel infill with cement | 3700 | Office,Control Center |
| Guangzhou TaiKoo Hui | FS662 600*600 | 30mm | Calcium sulphate | 3000 | Office |
| Guangzhou Vanlas Fort Hotel Office | FS662 600*600 | 33mm | Steel infill with cement | 20000 | Office |
| Guangzhou media port | FS1000 600*600 | 35mm | Steel infill with cement | 12500 | Office,Control Center,Server Room |
| Guangzhou Tianhe No.2 super computer | FS1250 600*600 | 35mm | Steel infill with cement | 7820 | Server Room |
| Guangzhou Nansha Toyota | FS1000 600*600 | 35mm | Steel infill with cement | 3900 | Office,Control Center,Server Room |
| Guangzhou Times Property E-park | FS662 600*600 | 28mm | Steel infill with cement | 55000 | Office |
| Guangzhou Panyu China Mobile | FS1250 600*600 | 32mm | Calcium sulphate | 3200 | Server Room |
| Guangzhou Modern Plaza | FS662 600*600 | 33mm | Steel infill with cement | 20000 | Office |
| Guangzhou Fedex Transition Center | FS1000 600*600 | 33mm | Steel infill with cement | 4800 | Office,Control Center,Data Center |
| Guangzhou tax plaza | FS1000 600*600 | 35mm | Steel infill with cement | 12900 | Data Center |
| Guangzhou Museum | FS1000 600*600 | 35mm | Steel infill with cement | 2400 | Data Center |
| Guangzhou C&F Science Plaza | FS662 600*600 | 35mm | Steel infill with cement | 13800 | Office |
| Guangzhou Baiyun Conference Center | FS1000 600*600 | 35mm | Steel infill with cement | 3500 | Office,Control Center |
| Shenzhen Kade No.1 Park | FS662 500*500 | 28mm | Steel infill with cement | 15000 | Office |
| Shenzhen Pingan Plaza | FS662 600*600 | 35mm | Steel infill with cement | 2000 | Office,Data Center |
| Shenzhen Baili Plaza | FS662 600*600 | 33mm | Steel infill with cement | 30000 | Office |
| Shenzhen Qianhai Times Plaza | FS662 500*500 | 28mm | Steel infill with cement | 10000 | Office |
| Shenzhen New Huafu | FS662 600*600 | 35mm | Steel infill with cement | 10000 | Office |
| China Mobile (Guangdong branch) | FS1250 600*600 | 35mm | Calcium sulphate | 10000 | Server Room |
| China Mobile (GuangXi branch) | FS1000 600*600 | 35mm | Steel infill with cement | 30000 | Server Room |
| China Mobile (Tanshan branch) | FS1250 600*600 | 35mm | Calcium sulphate | 800 | Server Room |
| China Mobile (Sichuan branch) | FS1000 600*600 | 35mm | Steel infill with cement | 700 | Server Room |
| China Mobile (Quanzhou branch) | FS1000 600*600 | 35mm | Steel infill with cement | 1600 | Server Room |
| China Mobile (NingXia branch) | FS1000 600*600 | 35mm | Steel infill with cement | 1200 | Server Room |
| China Mobile (Hebei branch) | FS1000 600*600 | 35mm | Steel infill with cement | 1000 | Server Room |
| China Mobile (Liaoning branch) | FS1000 600*600 | 32mm | Steel infill with cement | 25000 | Server Room |
| China Mobile (Jiangxi branch) | FS1250 600*600 | 35mm | Calcium sulphate | 1200 | Server Room |
| China Mobile (Hunan branch) | FS1250 600*600 | 32mm | Calcium sulphate | 26700 | Server Room |
| China Mobile (Guizhou branch) | FS1000 600*600 | 35mm | Steel infill with cement | 1200 | Server Room |
| China Mobile (South Center in Guangzhou) | FS1000 600*600 | 35mm | Steel infill with cement | 13043 | Server Room |
| Huizhou Kaisa Commercial building | FS662 600*600 | 35mm | Steel infill with cement | 10000 | Office |
| Huizhou TSINGHUA TONFANG | FS662 600*600 | 35mm | Steel infill with cement | 30000 | Office |
