Wuxi Luole Machinery Co., Ltd |
|
Double Milling Heads Hydraulic Bending Machine , Boiler Horizontal Plate Bevelling Machine
Competitive Advantage:
1. The rail of lathe bed use high quality carbon steel,
welded together with the machine after milling, and then by
machining, which with good Wear-resisting performance, and it’s
hard deformation.
2. lathe bed, wall panels, and pressure beam welded by high quality
plate, using box-type structure. All welds according to
specifications welding, after welding parts need to be annealed to
eliminate the welding stress. Lathe bed rail is 45 # steel
forgings, processed high-frequency hardening, hardness HRC45 ~ 50,
removable, and the bed fixed with bolts and dowel pin for easy
maintenance.
3. .The normal elastic deformation of the beam on elastic 8-20mm,
cylinder release after the reset is a normal situation.
4. .The trolley of the travel box drove by one feeding motor and
fast return motor. The travel box install with reduce unit, one
extend gear matched on the rail, start the motor it can move the
trolley as milling speed. Feeding speed is variable, fast speed can
upto 1m/min,travel smooth, with high milling efficiency. The travel
also install with fast return motor, fast return speed is 5m/min,A
clutch to control work.
5. .Cross slider installed on the trolley box , power-operated
lifting, warm and wheel reducer, screw driven slide down. Manually
adjustable front and rear direction, from top to bottom and front
and rear direction of the Vice-regulation are used to guide rail.
Cross slider adjusting smooth and reliable, easy operation
6. .Angle adjusting mechanism mounted on the lifting of regulatory
agencies on a skateboard, skateboarding down with the lift. The
unit mainly by a fan-shaped worm gear and a worm component, manual
adjustment. Head connected to the fan worm gear by an transition
plate, , the angle adjusting mechanism allows Head 0-45 ° angle
with the horizontal adjustment. Meet the needs of groove.
7. Hydraulic control system install inside of the lethe bed, the
bottom half of the hydraulic control is the oil box, top half
install with hydraulic components, pump station and motor, etc.
Hydraulic oil through hight pressure hose to each oil way and
cylinder.
Description:
Milling head setted on the trolley, and
in front of the milling head installed with cross slider and angle
adjusting unit. After fixed the plate, the cross slider will
adjusting the position between milling head and plate, meanwhile it
can adjusting the angle adjusting unit, and the milling head can be
adjusted in the range of 0-45°, which can satisfy different bevel
requirement. When milling, the milling head revolving in a high
speed, and milling the plate through milling cutter. Trolley
milling speed adjusting VFD in the range of 0.1-1m/min, moving
smoothly. In order to improve the working efficiency, the trolley
designed with fast return motor, fast return speed upto 5m/min.
Specifications:
If you do not see anything that matches your requirements please
contact us to discuss your needs further.
Model | XB-6 | XB-9 | XB-12 | |
The angle of milling | 0-45 | |||
The thickness of being processed steel plate (mm) | 6-50 | |||
The max depth of milling bevel edge at one time (mm) | 12 | |||
traveling speed(m/min) | 0.3/0.5 | |||
Returning speed(m/min) | 5 | |||
Spindle rev.(rpm) | 125-800 | |||
Hydraulic pressure (Mpa) | ≤3.5 | |||
The number of the cylinders | 8 | 11 | 15 | |
The height between the worktable and the ground (mm) | 900 | |||
The power of driving motor (kw) | 1.1/0.85 | |||
The power of milling motor (kw) | 3 | |||
The power of oil pump motor (kw) | 5.5 |
Machine Features
Steel Plate Groove is a critical part in the
shipbuilding field .The groove precision decided the welding
quality .Digital Show Device may test the groove deepth with high
accuracy . The groove quality is very important to welding
seam . We often beveling the groove .The milling machine can processing different forms of plate , such
as sheet metal before welding, machining straight-edge, bevel, X,
Y,U groove, etc., for welding with improved product quality and
work efficiency, reduce energy consumption, reduce labor intensity,
etc., it’s the latest groove advanced processing equipment.
This series groove milling machine is the
popular and advanced machine, which instead of the planing machine.
It is widely used in the equipment manufacturing, such as pressure
, boiler, shipbuilding, electric power, chemical and machinery
industries. sheet metal straight edge before welding, machining,
bevel and U groove, especially improved product quality for welding
automatic welding, improve efficiency, reduce consumption, reduce
labor intensity, etc., it’s the advanced processing equipment which
instead of the edge planing machine.