150 Tons Heavy Duty Pipe Rollers Siemens VFD Control Linear Speed 1000 mm/min Wheel Motorized Moving

150 Tons Heavy Duty Pipe Rollers Siemens VFD Control Linear Speed 100 --- 1000 mm/min Wheel Motorized Rolling 

Supply Ranges

1. Consist : One powered roller , One idler roller , Electric control system

2. Adjust way : Adjust the pipe diameter automatically with diameter 750 - 4800 mm

3. Voltage : 110V - 600 V 50 / 60 Hz 1P / 3P all available

4. Control Way : Remote hand control box / Wireless hand control box

5. Roller Material : Rubber / Steel / PU ( Polyurethane roller for Nonferrous Metals )

6. Original : Our factory / Wuxi China

Attention More

1. Movable rotators can auto move on the rails for the third single pipe butt welding.

2. It will be controled by Hand Remote Control Box or Wireless Control Box.

3. During two single pipes butting , the position could not butt well sometimes , our rotators can adjust the

    butt position up or down / left or right to realize the perfect butt position.

4. Two self aliging rollers in the two end, and two hydrulic adjust rollers in the middle to adjust the butt positon.

Specification

Applications

1. For pipe support and turning for auto seam welding

2. To make wind tower

3. For auto circle seam welding

4. Controlled by foot pedal / hand control box

More Questions Customers May Concerned

Q : What about the transportion?

A : 1. Fully packaged in wooden case to anti damage during the transportational process .

     2. Usually we take seaway ,cause its more convenient and cheaper for big machine.

     3. Door to door delivery service is also available.

Q : What is your warranty and after sale service ?

A : 1. All our equipments with One Year Warranty time , fully test at our work shop before delivery.

     2. If you have any questions on the installation , you will get our engineers respond within 24 hours.

Details Control system and Brand

1. Inverter is from Delta / Yaskawa Brand

2. Motor is from CE Invertek Brand

3. Reducer is from Hangzhou. Made in China.

4. Electric system is from Schneider / Siemens

Our suggestion

1. Normally under 60 T model we use the Rubber material rollers , upper we use Steel material rollers. 
2. If your work piece material is Nonferrous Metals , we suggest PU rollers.
3. Self-aligning welding rotator / Bolt adjsutment / Lead Screw adjustment / Fit up rotators all available.
 

DO NOT HESITATE ! JUST SEND US YOUR INQUIRY NOW.