Pagoda Pole Automatic Assemblying and Welding Machine Use Submurged Ac Welding Method Fix Welding Wire and Flux System

Pagoda Pole Automatic Assemblying and Welding Machine Use Submurged Ac Welding Method Fix Welding Wire and Flux System
 
 Machine Overview :
    As a famous factory specially in producing the pole clamping and welding machine. We have lots of experience in producing this machine.The pole was widely used in the city and road. It is suitable  for one piece type polygonal  and circle taper light pole. it is automatic welding line, the dolly with  speed adjustable motor can pull (or push) the light pole from small end to big end , The hydraulic cylinder through  mechanical chain, Worm wheel  push  the  clamping wheel to close the pole and do welding at the same time. 
    Polygonal Conical Staff shut and welding machine mainly use for combining the pole longitudinal steel joint and welding the seam.
 
The machine includes the following items :

• Long working table with rack for pull doly.
• Dolly for pulling pole 
• Hydraulic clamping and welding unit (including 3 sets clamping wheels for 
• polygonal and circle pole) 
• Submerged Arc Welding and Gas-shielded welding(CO2) Welding system, 
• including welding wire feeding system. 
• The flux recovering system 
• back support unit 
• hydraulic system

 
Technical Parameters 
 

 
 
 Optional:
     Lincoln welding machine (USA  BRAND)
Note:, If chose the Lincoln welding machine,normally it is suitable for Submerged Arc Welding
 process
 
    Fast motorized return back for dolly 
Note:for the standard machine, the dolly return back can be motorized with working speed, it 
is very slow for return back process. So, normally, the operator will open the dolly clutch and 
push the dolly by manual. 
In order to reduce the manpower, we have option: Fast motorized return back for dolly. The 
operator only push button, the dolly will be back to the welding head. 
See attached detail photos.
 
    Both Side additional hydraulic cylinder  
It is suitable for small diameter big thickness light pole, or steel plate with high tensile 
strength light pole.
With this additional option , the diameter from 60~450mm, thickness 2.8~6mm, all pole can be 
suitable. And easy for operation. 
 
Applications:
 
Electricity pole and lamp pole  was widely used in the countryside and City ,such as electricity transport pipe , shine lamp pole ;  blinker , Offshore,Petro Chemical ; Plate Heat Exchanger ; Charged air cooler ; Pressure Vessel ;Pipe system&Steel works etc.
 
 
Competitive Advantage:
 
1. All the bolt using 12.9 grade Bolt , not using 8.4 grade. Making the machine more stronger.
2. 20 % overweight design , could making the rotator focus more.
3. Double row wheels ,not only making the wheels stable, but also artifacts to increase friction.
4. All the parts using well-known brands in China or other countries . Quality is more reliable .
5. Using double row bearings.
6. The base of rotator welded by plates, with high strength, no deformation after long time using.
 
 
Why choose my factory?
 
360°guarantee makes ordering risk free.
20 years welding machine manufacture experiences.
one-stop service of welding.
OEM service.
Quickly feedback for your problems.