Active Member
|
[China]
Address: #15 ShiShan Road, Haicang District, Xiamen China 361027
Contact name:
TBB Power Co., Ltd. |
|
|
Bult in solar charge controller MPPT battery Charger 12V30A DX1230 for truck mobile carravan
TBB Brand NEMO Series Booster Charger
Nemo booster charger is a simple but perfect in vehicle charging solution. It draws power from alternator to perform a quick charging for auxiliary battery while you are driving. Compatible with EURO6 Engine, Nemo could maintain the charging with a stable output with smart alternator to assure your battery getting a fully charging in the shortest time without worry about overcharging or undercharging.
NEMO converter charger is compatible with Smart Alternator (Euro 6)
which delivers
a variable output when they are not needed. It can maintain the
charging with a stable
output in this situation, free from rpm or speed, to assure your
battery getting a fully
charging in a shortest time. Upon connecting with PV (For DDX and
IDDX series), it will
offer a maintenance charging to your starter battery to eliminate
the engine starting
problem.
Features
Lithium battery compatible
NEMO booster charger could deliver a proper charging for lithium battery which is normally very sensitive to voltage. In the meantime, it is designed with built-in temperature regulated charging algaorithm which is important for lithium battery under cold environment temperature.
Terminal and panel definition
With both PV and Alternator input
With Alternator input
Specifications
| Model | DX1225 | DDX1225 |
| Electrical | ||
| Input nominal voltage | 12VDC | |
| Alternator input voltage range (smart type) | 12-16VDC | |
| Alternator input voltage range (conventional type) | 13.2-16VDC | |
| Automatic activation -D+ | yes | |
| MPPT | N/A | yes |
| PV input voltage range | N/A | 12-25VDC |
| Output nominal voltage | 12VDC | |
| Charge current | 25A | |
| Efficiency | max 97% | |
| Termperature compensation | yes | |
| Voltage compensation | yes | |
| Charge algorithm | TBB premium II multi stages | |
| Protection | Battery charger over temperature/ Battery over temperature/ Over load/ Short circuit | |
| Operation temperature | -20C-60C | |
| Enclosure | ||
| Material | Aluminum with anodized, flame proof plastic | |
| Battery connection | M8 | |
| Protection category | IP65 | |
| Weight | 0.8kgs | |
| Dimension | 186.3*102.3*60mm | |
| Standards | ||
| Safety | EN60335-1, EN60335-2-29 | |
| Emission | EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3 | |
