|
[China]
Trade Verify
Address: Baiyun District, Guangzhou City, Guangdong Province, China
Contact name:Yang Aijun
Guangzhou Bogeman Mechanical Seal Co., Ltd. |
|
Verified Suppliers
|
|
|
155 O Ring Compressor Mechanical Seal 32mm Replace Burgmann ISO Approved
155 O-RING Mechanical Seal Replace Burgmann BT-FN Pump Seal Mechanical Seal
Basic Info. of Compressor Mechanical Seal
Model NO.
155
Type
155
Balance
Unbalanced
Trademark
Trisun, Nuetral or customised
Transport Package
Bergman, Nuetral or Customised
Specification
42*32.5*32
Origin
China
HS Code
84842000
John Crane Type 155 Burgman BT-AR Solar Pump Water Pump Seal Mechanical Seal Shaft Diameter 155-10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 35 38 40mm Material CAR CER NBR SS304 manufacturer, excellent workmanship, excellent quality, durable, bulk spot delivery, fast delivery
Compressor Mechanical Seal Operating Limits:
| Pressure: ≤1MPa |
| Speed: ≤15 m/s |
| Temperature: -30ºC~+200ºC |
1. Rotary Ring(Sic/tc)
2. Stationary Ring(Plastic Carbon/Carbon/Sic/Tc)
3. Secondary Seal(nbr/Epdm/)
4. Spring & Other Parts(Sus304/Sus316)
Model | d1 (mm) | d3 | d7 | l1 | l3 |
155-10 | 10 | 20 | 18.1 | 20.5 | 5.5 |
155-11 | 11 | 22 | 20.6 | 23.5 | 5.5 |
155-12 | 12 | 22 | 20.6 | 23.5 | 5.5 |
155-13 | 13 | 25 | 23.1 | 28 | 6 |
155-14 | 14 | 25 | 23.1 | 28 | 6 |
155-15 | 15 | 29 | 26.9 | 30 | 7 |
155-16 | 16 | 29 | 26.9 | 30 | 7 |
155-17 | 17 | 29 | 26.9 | 30 | 7 |
155-18 | 18 | 33 | 30.9 | 32 | 8 |
155-19 | 19 | 33 | 30.9 | 33 | 8 |
155-20 | 20 | 33 | 30.9 | 33 | 8 |
155-21 | 21 | 38 | 35.4 | 33 | 8 |
We are a manufacturer. All seals have bulk inventory and can be shipped to you quickly. We promise to ship you in small quantities within 3 days.Advanced technology, excellence, replace original
| 1. Different models of mechanicals seals for a wide variety of Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc. Available in diverse combinations of materials and different diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for Sarlin®. Division of waster pumps. Available in various materials: silicon-graphite carbide, silicon carbide-silicon carbide; combined with EPDM and FKM elastomers. | |||||||||||||
| 2. Mechanical seals are available for different references
Gorman-Rupp® pumps. Special models for the transfer of clean water,
sewage, oil industry, agriculture and others. GRN-38'1 | |||||||||||||
| 3. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT. | |||||||||||||
| 4. Broad range of mechanical seals compatible with Flygt® and Grindex® waste water pumps. These mechanical seals are characterized by their easy and fast installation, without having to make any modification to the pump. Manufactured in stainless steel and in solid tungsten carbide. Special tools are not necessary for their installation. | |||||||||||||
| 7. Mechanical seals for all types of Calpeda® pumps: centrifugal pumps, multistage, submersible. Different models of mechanical seals in a wide range of materials. | |||||||||||||
| 8. Mechanical seals compatible for APV® pumps, among them: Puma, ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some designs with wave spring like the special seals for APV Howard® pumps and Crepaco Clean Line®. All of them have been manufactured in materials suitable for working with fluids such as juices, milk and drinks in general. | |||||||||||||
| 9. Allweiler, Simple design of mechanical seals simple but with special measures for this type of pump. | |||||||||||||
| 10. Different models of mechanical seals compatible for Alfa-Laval® pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the range of lobular SSP and SR pumps. Mechanical seals in different combination of materials tungsten carbide, silicon carbide, graphite; combined with different types of elastomers: NBR, EPDM and FKM. | |||||||||||||
| 11. Mechanical seals for ABS® submergible pumps specific wastewater treatment. Different models of mechanical seal available: oil chamber mechanical seal and water mechanical seal. |
Fixing and Applying Directions of Mechanical Seals
| 1. Select Appropriate mechanical seal to match the materials according to work conditions and host machine equipment. |
| 2. The radial acting deviation for the shaft(shaft sleeve) of the installed mechanical seal shall be 0.04mm by maximum while the axial movement value of the rotor shall be no more than 0.1mm. |
| 3. The seal cover (or shaft cover) of the stationary ring of the installed mechanical seals,the vertical degree of the seal face should be 0.04mm by maximum. |
| 4. When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal face should be 0.04mm by maximum. |
| 5. When conveying medium of over high or low temperature,with medium which are easy catch fire,easy for explosion.Related mechanical seal standards must be referred to take appropriate measures such as quench,rinsing,coolong and filtrating. |
| 6. Appropricate lubrication must be choosen when mechanical seal is installed.The installment size of the mechanical seal must be guaranteed to the installment instruction. |
| 7. Before the machine starts running,the hermetic compartment shall be full of medium and well lubricated.Dry friction which may lead to the damage of the air-tightness is strict forbidden. |
FAQ
Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade
service.
Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.
Question 3: Where is your factory located? How can I visit there?
Answer: Our factory is located in Ningbo, China. You can fly to
Ningbo or Shanghai airport directly. All our clients, from home or
abroad, are warmly welcome to visit us!
Question 4: How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to
quality controlling from the very beginning to the very end. Our
factory has gained ISO9001 authentication.
Question 5: How about the lead time?
Answer: Within10-20 days after getting the prepayment.
Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by
paypal or by T/T. And by T/T at sight for large amount of the
order.
Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.
Question 8: If I can buy pumps or pump parts from your company?
Answer: Yes , we also provide pumps and pump parts, such as Lobe
pumps, Compound & homogeneous pumps, Homogeneous &
emulsification pumps and so on
