|
[China]
Trade Verify
Address: Baiyun District, Guangzhou City, Guangdong Province, China
Contact name:Yang Aijun
Guangzhou Bogeman Mechanical Seal Co., Ltd. |
|
Verified Suppliers
|
|
|
104B Industrial O Ring Seal Automotive Water Pump Seal 25mm 30mm Unbalanced
Mechanical Seal Type 104B Industrial Pump O-Ring Seal Mechanical Seal
Basic Info.
Model NO.
Metal bellows seal
Manifold Pump Seal
104B Seal
Grundfos Pump Seal
Rubber Bellow Seal
Che Pump Seal
Mechanical Seal
Flygt pump seal
Pump Seal
Industrial Pump
Oil pump seal
ABS Pump Seal
Blackmer Seal
Food pump seal
CAR/SIC/TC/
Lowara Pump Seal
O-ring
Oil pump seal
SS304/316
Automotive pump seal
Skeleton oil seal
Specification
25mm and 50mm
Origin
China
HS Code
84842000
1. Basic Features
| Structure: Single End |
| Pressure: Medium Pressure Mechanical Seals |
| Speed: General Speed Mechanical Seal |
| Temperature: High Temperature Mechanical Seal |
| Performance: Wear |
| Standard: DIN24960, ISO3069, GB6556-94 |
| Model NO.: Type 104B |
| Balance: Unbalanced |
| Specification: Inner Diameter: 25 mm to 50 mm |
2. Product Detailed Description
Type 104B Mechanical Seal for Clean Water Pumps, Circulating Pumps and Vacuum Pumps
| 1. Structural Features: single end, unbalanced, fixed direction of rotation, touched coil spring transmission. This component has a touched coil spring so you need to pay attention to the shaft rotating direction. |
| 2. Industrial Standards: DIN24960, ISO3069, GB6556-94 |
| 3. Scopes of Application: widely used in many types of chemical pumps and clean water pumps. |
3. Operation Parameters:
| Pressure: 0.8 MPa or less |
| Temperature: - 20 ~ 220 ºC |
| Linear Speed: 15 m/s or less |
| Materials: |
| Rotary Ring: Carbon/SiC/TC |
| Stationary Ring: SiC/TC |
| Elastomers: NBR/EPDM//Aflas/PTFE/FFKM |
| Springs: SS304/SS316 |
| Metal Parts: 410S/SS304/SS316/SS316L |
4. Mediums: weak acid, weak alkalis, water and solvents.
We are a manufacturer. All seals have bulk inventory and can be
shipped to you quickly. We promise to ship you in small quantities
within 3 days.Advanced technology, excellence, replace original
1. Different models of mechanicals seals for a wide variety of
Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc.
Available in diverse combinations of materials and different
diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for
Sarlin®. Division of waster pumps. Available in various materials:
silicon-graphite carbide, silicon carbide-silicon carbide; combined
with EPDM and FKM elastomers.
2. Mechanical seals for Fristam® pumps. Wide range of models and
materials in the most standard diameters: 22,30 and 35 mm.
Different assembly possibilities for the most well-known pump
models: FP, FL and FT.
3. Broad range of mechanical seals compatible with Flygt® and
Grindex® waste water pumps. These mechanical seals are
characterized by their easy and fast installation, without having
to make any modification to the pump. Manufactured in stainless
steel and in solid tungsten carbide. Special tools are not
necessary for their installation.
4. Mechanical seals for EMU® pumps. They get two static faces and
one rotating face. We can supply the complete seal or spare faces.
5. Different designs of mechanical seals for Ebara® pumps, single
and double seals in combinations carbide-silicon carbide and
graphite-aluminium oxide.
6. Mechanical seals for all types of Calpeda® pumps: centrifugal
pumps, multistage, submersible. Different models of mechanical
seals in a wide range of materials.
7. Mechanical seals compatible for APV® pumps, among them: Puma,
ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some
designs with wave spring like the special seals for APV Howard®
pumps and Crepaco Clean Line®. All of them have been manufactured
in materials suitable for working with fluids such as juices, milk
and drinks in general.
8. Allweiler, Simple design of mechanical seals simple but with
special measures for this type of pump.
9. Different models of mechanical seals compatible for Alfa-Laval®
pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the
range of lobular SSP and SR pumps. Mechanical seals in different
combination of materials tungsten carbide, silicon carbide,
graphite; combined with different types of elastomers: NBR, EPDM
and FKM.
Fixing and Applying Directions of Mechanical Seals
| 1. Select Appropriate mechanical seal to match the materials according to work conditions and host machine equipment. |
| 2. The radial acting deviation for the shaft(shaft sleeve) of the installed mechanical seal shall be 0.04mm by maximum while the axial movement value of the rotor shall be no more than 0.1mm. |
| 3. The seal cover (or shaft cover) of the stationary ring of the installed mechanical seals,the vertical degree of the seal face should be 0.04mm by maximum. |
| 4. When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal face should be 0.04mm by maximum. |
| 5. When conveying medium of over high or low temperature,with medium which are easy catch fire,easy for explosion.Related mechanical seal standards must be referred to take appropriate measures such as quench,rinsing,coolong and filtrating. |
| 6. Appropricate lubrication must be choosen when mechanical seal is installed.The installment size of the mechanical seal must be guaranteed to the installment instruction. |
| 7. Before the machine starts running,the hermetic compartment shall be full of medium and well lubricated.Dry friction which may lead to the damage of the air-tightness is strict forbidden. |
Question : Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.
Question :How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end.
