|
[China]
Trade Verify
Address: Baiyun District, Guangzhou City, Guangdong Province, China
Contact name:Yang Aijun
Guangzhou Bogeman Mechanical Seal Co., Ltd. |
|
Verified Suppliers
|
|
|
CDLA 36 WBF14 Centrifugal Pump Mechanical Seal CNP Southern Pump CDL CDLF 200
CDLA-36/WBF14 cartridge seal is suitable for CNP Southern Pump Industry CDL CDLF 200
CDM CDMF 200 cubic stainless steel vertical multistage pump mechanical seal kit original material CAR SSIC TC EPDM AFLAS SS304 SS316 Industry leading Manufacturers bulk spot
| We have all pump mechanical seals in South China Pump Industry |
|
|
|
|
Pump model | Seal model | Seal model | Seal model | Seal model | Seal model |
CDL CDLF CDM CDMF | CDLA-12 | CDLA-16 | CDLA-22 | CDLA-32 | CDLA-36 |
CDLK CDLKF | CDL-12 | CDL-16 |
|
|
|
CHL CHLF CHM | CHL-16 | CHL-20 | CHM-14 | CHM-19 |
|
MS | MS-14 |
|
|
|
|
ZS | ZS-24 | ZS-32 |
|
|
|
TD | TD-28 | TD-32 | TD-40 | TD5-40/43 | TD5-48/55 |
QYL QYLB | QY-15 | QY-17 | QY-20 |
|
|
NIS NISO NIF | NISO-33 | NISO-43 | NISO-53 | NISO-60 |
|
WQ | WQ-17 | WQ-20 | WQ-25 | WQ-30/35/40/45 | WQ-50/60/70 |
CDLS CDLH | CDLC-12 | CDLC-16 | CDLC-22 |
|
|
SZ | SZ-30 | SZ-35 | SZ-40 | SZ-45/50 | SZ-55/60 |
SP | SP1-1/2 | SP1-7/8 |
|
|
|
We are a manufacturer. All seals have bulk inventory and can be shipped to you quickly. We promise to ship you in small quantities within 3 days.Advanced technology, excellence, replace original
| 1. Different models of mechanicals seals for a wide variety of Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc. Available in diverse combinations of materials and different diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for Sarlin®. Division of waster pumps. Available in various materials: silicon-graphite carbide, silicon carbide-silicon carbide; combined with EPDM and FKM elastomers. |
| 2. Mechanical seals are available for different references
Gorman-Rupp® pumps. Special models for the transfer of clean water,
sewage, oil industry, agriculture and others. GRN-38'1 |
| 3. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT. |
| 4. Broad range of mechanical seals compatible with Flygt® and Grindex® waste water pumps. These mechanical seals are characterized by their easy and fast installation, without having to make any modification to the pump. Manufactured in stainless steel and in solid tungsten carbide. Special tools are not necessary for their installation. |
| 5. Mechanical seals for EMU® pumps. They get two static faces and one rotating face. We can supply the complete seal or spare faces. |
| 6. Mechanical seals for all types of Calpeda®pumps: centrifugal pumps, multistage, submersible. Different models of mechanical seals in a wide range of materials. |
| 7. Allweiler, Simple design of mechanical seals simple but with special measures for this type of pump. |
| 8. Different models of mechanical seals compatible for Alfa-Laval® pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the range of lobular SSP and SR pumps. Mechanical seals in different combination of materials tungsten carbide, silicon carbide, graphite; combined with different types of elastomers: NBR, EPDM and FKM. |
| 9. Mechanical seals for ABS® submergible pumps specific wastewater treatment. Different models of mechanical seal available: oil chamber mechanical seal and water mechanical seal. |
Fixing and Applying Directions of Mechanical Seals
1. The radial acting deviation for the shaft(shaft sleeve) of the
installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than
0.1mm.
2. When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
3. When conveying medium of over high or low temperature,with
medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take
appropriate measures such as quench,rinsing,coolong and
filtrating.
4. Appropricate lubrication must be choosen when mechanical seal is
installed.The installment size of the mechanical
seal must be guaranteed to the installment instruction.
5. Before the machine starts running,the hermetic compartment shall
be full of medium and well lubricated.Dry friction
which may lead to the damage of the air-tightness is strict
forbidden.
Question : Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.
Question: What is the size of the product?
Answer: Detailed dimensional information is available in each of
our products
