|
[China]
Trade Verify
Address: Baiyun District, Guangzhou City, Guangdong Province, China
Contact name:Yang Aijun
Guangzhou Bogeman Mechanical Seal Co., Ltd. |
|
Verified Suppliers
|
|
|
Horizontal Centrifugal CNP Pump Mechanical Seal 32mm Original Seals ZS-24/BSE4
Mechanical Seal ZS-24/BSE4 ZS-32/BSE4 CNP Pump Mechanical Seal Original Seal
Southern Pump Industry ZS Horizontal Centrifugal Pump Mechanical Seal Original Factory Excellent sealing quality, excellent workmanship, durable, bulk spot
| We have all pump mechanical seals in South China Pump Industry | |||||
| Pump model | Seal model | Seal model | Seal model | Seal model | Seal model |
| CDL CDLF CDM CDMF | CDLA-12 | CDLA-16 | CDLA-22 | CDLA-32 | CDLA-36 |
| CDLK CDLKF | CDL-12 | CDL-16 | |||
| CHL CHLF CHM | CHL-16 | CHL-20 | CHM-14 | CHM-19 | |
| MS | MS-14 | ||||
| ZS | ZS-24 | ZS-32 | |||
| TD | TD-28 | TD-32 | TD-40 | TD5-40/43 | TD5-48/55 |
| QYL QYLB | QY-15 | QY-17 | QY-20 | ||
| NIS NISO NIF | NISO-33 | NISO-43 | NISO-53 | NISO-60 | |
| WQ | WQ-17 | WQ-20 | WQ-25 | WQ-30/35/40/45 | WQ-50/60/70 |
| CDLS CDLH | CDLC-12 | CDLC-16 | CDLC-22 | ||
| SZ | SZ-30 | SZ-35 | SZ-40 | SZ-45/50 | SZ-55/60 |
| SP | SP1-1/2 | SP1-7/8 |
We are a manufacturer. All seals have bulk inventory and can be shipped to you quickly. We promise to ship you in small quantities within 3 days.Advanced technology, excellence, replace original
| 1. Different models of mechanicals seals for a wide variety of Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc. Available in diverse combinations of materials and different diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for Sarlin®. Division of waster pumps. Available in various materials: silicon-graphite carbide, silicon carbide-silicon carbide; combined with EPDM and FKM elastomers. | |||||||||||||
| 2. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT. | |||||||||||||
| 3. Broad range of mechanical seals compatible with Flygt® and Grindex® waste water pumps. These mechanical seals are characterized by their easy and fast installation, without having to make any modification to the pump. Manufactured in stainless steel and in solid tungsten carbide. Special tools are not necessary for their installation. | |||||||||||||
| 4. Mechanical seals for EMU® pumps. They get two static faces and one rotating face. We can supply the complete seal or spare faces. | |||||||||||||
| 5. Different designs of mechanical seals for Ebara® pumps, single and double seals in combinations carbide-silicon carbide and graphite-aluminium oxide. | |||||||||||||
| 6. Allweiler, Simple design of mechanical seals simple but with special measures for this type of pump. | |||||||||||||
| 7. Mechanical seals for ABS® submergible pumps specific wastewater treatment. Different models of mechanical seal available: oil chamber mechanical seal and water mechanical seal. |
Fixing and Applying Directions of Mechanical Seals
1. Select Appropriate mechanical seal to match the materials
according to work conditions and host machine equipment.
2. The seal cover (or shaft cover) of the stationary ring of the
installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
3. When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
4. When conveying medium of over high or low temperature,with
medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take
appropriate measures such as quench,rinsing,coolong and
filtrating.
5. Before the machine starts running,the hermetic compartment shall
be full of medium and well lubricated.Dry friction
which may lead to the damage of the air-tightness is strict
forbidden.
