|
[China]
Trade Verify
Address: Baiyun District, Guangzhou City, Guangdong Province, China
Contact name:Yang Aijun
Guangzhou Bogeman Mechanical Seal Co., Ltd. |
|
Verified Suppliers
|
|
|
166T 76.2mm Centrifugal Pump Mechanical Seal O Ring Type ISO9001
Mechanical Seal Type 166T-9.525-76.2mm Water Pump Seal Mechanical Seal
Basic Info.
Model NO.
166T
Type
O-Ring Mechanical Seals
Balance
Balanced
Function
for Pump, Compressor
Certificate
ISO9001
Replacement to
Burgmann M37/M37g Seal
Trademark
Bergman
Transport Package
Carton
Specification
as requirement
Origin
China
HS Code
84842000
centrifugal pump mechanical seal type 166T-5/8 3/4 7/8 1" 1-1/8 1-1/4 1-3/8 1-1/2 1-3/8 1-3/4 1-7/ 8 2"Water pump seal mechanical seal material CAR CER SSIC TC NBR EPDM manufacturer Excellent quality, excellent workmanship, durable bulk spot
AS-166T are single conical spring, unbalanced seal with the
presence of an O-Ring for secondary sealing.
Since the torque transmission comes from single coil springs, the
seals are dependent on directions of rotation, which can be seen
from the drive end of the shaft. Pac Seals AS-166T have taper
spring of various type and dimension
Model M3 can replace BURGMANN M3N/M37 and MTU EUROPA
1. Material
| Rotary Ring (SiC/Carbon/TC) |
| Stationary Ring (Carbon/SiC/TC) |
| O-Ring (NBR/EPDM//PTFE) |
| Retainer (SUS304/SUS316) |
| Spring (SUS304/SUS316) |
2. Recommended applications
Water Pump, Submersible Pump, Sewage Pump, Centrifugal Pump
3. Operating Limits
| Pressure: ≤1MPa |
| Speed: ≤10m/s |
| Temperature: -20℃~+200℃ |
We are a manufacturer. All seals have bulk inventory and can be shipped to you quickly. We promise to ship you in small quantities within 3 days.Advanced technology, excellence, replace original
| 1. Different models of mechanicals seals for a wide variety of Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc. Available in diverse combinations of materials and different diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for Sarlin®. Division of waster pumps. Available in various materials: silicon-graphite carbide, silicon carbide-silicon carbide; combined with EPDM and FKM elastomers. | |||||||||||||
| 2. Mechanical seals are available for different references
Gorman-Rupp® pumps. Special models for the transfer of clean water,
sewage, oil industry, agriculture and others. GRN-38'1 | |||||||||||||
| 3. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT. | |||||||||||||
| 4. Mechanical seals for EMU® pumps. They get two static faces and one rotating face. We can supply the complete seal or spare faces. | |||||||||||||
| 5. Mechanical seals for all types of Calpeda® pumps: centrifugal pumps, multistage, submersible. Different models of mechanical seals in a wide range of materials. | |||||||||||||
| 6. Mechanical seals compatible for APV® pumps, among them: Puma, ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some designs with wave spring like the special seals for APV Howard® pumps and Crepaco Clean Line®. All of them have been manufactured in materials suitable for working with fluids such as juices, milk and drinks in general. | |||||||||||||
| 7. Allweiler, Simple design of mechanical seals simple but with special measures for this type of pump. | |||||||||||||
| 8. Different models of mechanical seals compatible for Alfa-Laval® pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the range of lobular SSP and SR pumps. Mechanical seals in different combination of materials tungsten carbide, silicon carbide, graphite; combined with different types of elastomers: NBR, EPDM and FKM. | |||||||||||||
| 9. Mechanical seals for ABS® submergible pumps specific wastewater treatment. Different models of mechanical seal available: oil chamber mechanical seal and water mechanical seal. |
Fixing and Applying Directions of Mechanical Seals
| 1. Select Appropriate mechanical seal to match the materials according to work conditions and host machine equipment. |
| 2. The radial acting deviation for the shaft(shaft sleeve) of the installed mechanical seal shall be 0.04mm by maximum while the axial movement value of the rotor shall be no more than 0.1mm. |
| 3. When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal face should be 0.04mm by maximum. |
| 4. Appropricate lubrication must be choosen when mechanical seal is installed.The installment size of the mechanical seal must be guaranteed to the installment instruction. |
| 5. Before the machine starts running,the hermetic compartment shall be full of medium and well lubricated.Dry friction which may lead to the damage of the air-tightness is strict forbidden. |
