|
[China]
Trade Verify
Address: Dahuaguoji B515, Jingkai District
Contact name:Davis
Hefei Supseals International Trade Co., Ltd. |
|
Verified Suppliers
|
|
|
560A Water Elastomer Bellow Shaft Seals Single-Spring For Burgmann EA560 Mechanical Seal
Operations Conditions:
Material:
Performance Capabilities
Temperature | -30℃ to 200℃, dependent on the elastomer |
Pressure | Up to 10 bar |
Speed | Up to 15 m/s |
End play/axial float allowance | ±0.1mm |
Size | 560A: 8mm to 75mm 560B: 3/8'' to 3'' 560C: 16mm-75mm |
Brand | JR |
Face | Carbon, SiC, TC |
Seat | Ceramic, SiC, TC |
Elastomer | NBR, EPDM, FKM etc. |
Spring | SS304, SS316 |
Metal parts | SS304, SS316 |
Packing Detail | 1.From 8mm (or 3/8") to 20mm(or 7/8") is packed in plastic sheets
grouply and M box. 2.From 22mm(or 1") to 75mm(or 3") is wrapped in plastic 3.paper individually then grouply in M box. 3.Individual packing ,1 pc in 1 small box is available as well with cost of packing added. |
560A Single-Spring Mechanical Seal Replace Aesseal (MTU FP/T3S and EA560)
1.We have 3 different sizes, 560A & 560C is metric size, and 560B inches size
which is equivalent as john crane type 21.
2.There are many seat choices , W seat, WG seat and LM560 standard seat size.
We are engaged in manufacture and installation exporting and wholesaling quality range of Industrial Seal, Single Spring Seal, Balance and Unbalance Spring Seal, External Mounted Seal, PTFE Bellow External Mounted Seal, Catridge Balance Seal, Multiple Spring Balance Seal, Dry Running Reverse Balance Seal, Agitator Double Acting Unbalance Seal, Single Conical Helical Spring, Rubber Bellow Seal, Multi Spring Seal, Metal Bellow Seal, Elastomer Bellow Seal, Conical Spring Seal, Air Condition Compressor Seal, Auto Cooling Seal, Metallic Bellow Seal,
All ranges of mechanical seals for Flygt Pumps, Grundfos Pumps, Pumps, APV Pumps, Grindes Pumps, Fristam, ABS, Alleeiler, EMU, GEA
Tunchenhagen, Godwin, Hidrostal, Hilge, Johnson, Lowara, Waukesha, Vogelsang Pumps etc.
At the meantime, we could manufacture seals according to your sample or drawing, and design as your request,Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.
Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade
service.
Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.
Question 3: Where is your factory located? How can I visit there?
Answer: Our factory is located in Ningbo, China. You can fly to
Ningbo or Shanghai airport directly. All our clients, from home or
abroad, are warmly welcome to visit us!
Question 4: How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to
quality controlling from the very beginning to the very end. Our
factory has gained ISO9001 authentication.
Question 5: How about the lead time?
Answer: Within10-20 days after getting the prepayment.
Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by
paypal or by T/T. And by T/T at sight for large amount of the
order.
Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.
Question 8: If I can buy pumps or pump parts from your company?
Answer: Yes , we also provide pumps and pump parts, such as Lobe
pumps, Compound & homogeneous pumps, Homogeneous &
emulsification pumps and so on
