Active Member
|
[China]
Address: Fuzhen Industrial Development Zone, Botou City, Hebei Province
Contact name:Manager liu
Botou Xinchen Environmental Protection Equipment Co., Ltd. |
|
|
P84 Polyimide Filter Bag For Pulse-Jet Bag Dust Collector
P84 high temperature resistant needle-punched filter felt is INSPECFIBERS (polyimide fiber) produced.
It is a high-efficiency filter material with high temperature resistance and acid and alkali resistance developed by other non-woven fabric production process.
At present, there are only a few manufacturers in China that independently develop, design and produce the filter material.
P84 filter material has high temperature resistance (can be used for a long time below 260 °C), and has good chemical resistance.
It has a very significant filtering effect on dusty gas with acid and alkali, making it in the waste incineration industry. It has highlighted higher dust removal efficiency in the waste incineration industry.
Specifications
Fiber | P84 fiber bag | |||
Weight(g/m2) | 500-550g/m2 | |||
Thickness(mm) | 2.0-2.2mm | |||
Mechanical Finish | Heat-setting ,Singed one side | |||
Chemical Finish | PTFE impregnating | |||
Air Permeability (m2/m3/min) | 16 | |||
Break Strength(N/5cm) | Warp | ≥900 | ||
Weft | ≥1200 | |||
Break Elongation(%) | Warp | ≤35 | ||
Weft | ≤50 | |||
Working temperature (Degree C) | 260-280℃ | |||
Resistance to acid | Good | Resistance to oxidation | Good | |
Resistance to alkali | Good | Resistance to Hydrolysis | Good | |
Superior performance of P84 filter material:
① Cost saving: low pressure drop reduces costs
② Filtration efficiency: suitable for the most stringent
environmental standards, temperature resistance (up to 260°C/500°F)
③ Low failure rate
④ Longer working life
⑤ Excellent chemical stability (strong acid and alkali resistance,
can be used in PH2-12 occasions)
⑥ Applicable to a wide range
P84-special cross section:
The trilobal cross-section is the characteristic of P84 high
temperature resistant dust bag fiber. Compared with other round
fibers, this is a wealth, because it increases the surface area of
the fiber by 80%. It leads to:
① Unparalleled filtration efficiency
② Perfect cleaning effect
③ Since there is no dust or fine stone chips piercing into the
felt, there is the lowest possible pressure drop
FAQ
Q1. What is your terms of payment?
A: T/T will usually be accepted,details could be negotiated.
Q2. What is your terms of delivery?
A: FOB, CFR, CIF, DAP, FCA, EXW
Q3. How about your delivery time?
A: Generally, it will take 10to 20 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q5. What is your sample policy?
A: We could offer the sample for free charge but do not pay the
cost of freight.
