Active Member
|
[China]
Address: Fuzhen Industrial Development Zone, Botou City, Hebei Province
Contact name:Manager liu
Botou Xinchen Environmental Protection Equipment Co., Ltd. |
|
|
98.6% Effiency Spray Tower Scrubber Stable Operation
product description
Spray Tower Scrubber is a new type of gas purification equipment.
It is produced on the basis of floating packing layers gas. It is
widely used in industrial waste gas purification, dust removal and
other aspects.
The acid mist scrubber uses the contact between gas and liquid to
transfer the pollutants in the gas to,and then separates the clean
gas from the polluted liquid to achieve the purpose of cleaning the
air. The waste filled acid mist scrubber is treated by gas-liquid
reverse absorption, that is, the liquid is sprayed from the top of
the tower to the bottom with small droplets of mist,and the waste
gas flows up from the bottom of the tower to achieve the purpose of
gas-liquid contact. This method can cool the waste gas, absorb the
waste gas and remove the particles. After being treated in the
demisting section, the air will be cleaned.
Acid mist Scrubber contains body, filling layer, demisting layer,
circulating liquor pipeline,and circulating water channel.
Structure and working principle
The industrial waste gas enters the washing tower and is in full
contact with the washing liquid in the tower to generate a
neutralization reaction to achieve the treatment purification
effect, effectively remove dust and other various gases, and
finally meet the discharge requirements.
The equipment features:
1. Low noise, stable operation, simple operation, low cost, etc.
2. In addition to high dust efficiency, it can handle various gases
by using syrup and water.
3. Using high-quality PP sheet, corrosion-resistant, anti-aging,
long service life, and can be customized according to requirements;
Pictures
FAQ
1. Are you a factory?
--- Yes, we are a professional exhaust gas treatment manufacturer
for more than 15 years.
2.How do you check the goods?
--- We inspect all the materials when they arrive, and have sot
inspection during production process. All goods will be tested and
double inspected before delivery, providing 100% guarantee for
clients.
3. How to select the suitable models?
---The parameters above is just for your reference. We need you to
provide us the air flow, solvent composition, working hours,etc for
our team to design the suitable unit for you.
4.How and when can I get the quotation?
--- Send us the inquiry or leave us message. We will get back to
you within 5 minutes during the working time. All messages will be
replied whenever they comes.
5.What's your payment terms?
--- Usually we accept 100%T/T at present. 50% initial payment,down
payment before shipment. Other payment terms can be discussed when
order confirmed.
