Active Member
|
[China]
Address: A1101, Huifeng, No.4 Shashan Road, Jiangyin City, Jiangsu Province, China
Contact name:zhu
Yongjia Polyurethane Co., Ltd. |
|
|
The door panel is made of color-coated steel coil or aluminum alloy plate, filled with imported polyurethane foam material, which is strong and durable. The interior and exterior door panels can be sprayed in a variety of colors to match the tone of the building's periphery. The door leaf can be equipped with oval or square windows to increase light transmittance. You can open the door and the door to facilitate passage.
The sliding door of polyurethane thermal insulation door panel has good thermal insulation effect and is an ideal choice for exterior doors of factories and logistics.
Polyurethane low-pressure foaming machine is widely used in multi-mode continuous production of rigid and semi-rigid polyurethane products, such as: petrochemical equipment, directly buried pipelines, cold storage, water tanks, meters and other thermal insulation and sound insulation equipment craft products.
| No. | Item | Technical parameter |
| 1 | Foam application | Rigid Foam Shutter Door |
| 2 | Raw material viscosity(22℃) | POL ～3000CPS ISO ～1000MPas |
| 3 | Injection flow rate | 6.2-25g/s |
| 4 | Mixing ratio range | 100:28～48 |
| 5 | Mixing head | 2800-5000rpm, forced dynamic mixing |
| 6 | Tank Volume | 120L |
| 7 | Input power | Three-phase five-wire 380V 50HZ |
| 8 | Rated power | About 11KW |
| 9 | Swing arm | Rotatable 90°swing arm, 2.3m (length customizable) |
| 10 | Volume | 4100(L)*1300(W)*2300(H)mm, swing arm included |
| 11 | Color( customizable) | Cream-colored/orange/deep sea blue |
| 12 | Weight | About 1000Kg |
1. The pouring amount of the pouring machine can be adjusted from 0
to the maximum pouring amount, and the adjustment accuracy is 1%.
2. This product has a temperature control system that can
automatically stop heating when the specified temperature is
reached, and its control accuracy can reach 1%.
3. The machine has solvent cleaning and water and air purging
systems.
4. This machine has an automatic feeding device, which can feed at
any time. Both A and B tanks can hold 120 kg of liquid. The barrel
is equipped with a water jacket, which uses water temperature to
heat or cool the material liquid. Each barrel has a water sight
tube and a material sight tube.
5. This machine adopts a cut-off door to adjust the ratio of A and
B material to liquid, and the ratio accuracy can reach 1%.
6. The customer prepares an air compressor, and the pressure is
adjusted to 0.8-0.9Mpa to use this equipment for production.
7. Time control system, the control time of this machine can be set
between 0-99.9 seconds, and the accuracy can reach 1%.
Double interlining heating material tank with insulation outer layer, heart rapidly, low energy consumption. Liner, upper and low head all use stainless 304 material, upper head is precision machinery sealing equipped to make sure the air tight agitation.
Adopting floating mechanical seal device, high shearing spiral mixing head to make sure the even mixing within required adjusting range of casting mixing ratio. Motor speed is accelerated and frequency controlled through triangle belt so to realize the high speed rotation of mixing head in mixing chamber.
1. Fully controlled by SCM (Single Chip Microcomputer).
2. Using PLC touch screen computer. Temperature,pressure, revolving
speed display system.
3. Alarm function with acoustic warning.
We have our own technical team of chemical engineers and process engineers, all of whom have more than 20 years of experience in PU industry. We can independently develop raw material formulas like polyurethane rigid foam, PU flexible foam, polyurethane integral skin foam and polyurea that meet all customer' s requirements.
We have professional team of mechanical engineer, chemical engineer, process engineer, etc, all of them have more than 10 years experience in PU foam filed. Meanwhile, our salemen are all professional, they are young but hard-working and experienced. We can meet all of your requirements for PU foam product, pu mold or PU foam machines.
1. Professional and patient consulting service to help you find the
suitable solution.
2. Further negotiation about the technical details, machine
configuration, price basis, payment term and delivery time.
3. Powerful control of the machine production schedule and quality,
and keep you posted about details in time.
4. Free training in our plant during machine inspection. Or photos
and video of the machine and package for your confirmation before
shipment.
5. Quick and safe shipment as per your requirement including the
booking ,container loading, and shipping documents.
6. For technical support, we can help you online by email and
phone, also we can send technicians to your site if necessary.
7. For the spare parts, we will supply the parts for free during
one year guarantee period, also the parts supplying at original
cost after that .
8. We give an accessory box for free.
9. We offer development solutions for raw material formulations.
10. If you need to visit the factory, we will arrange for personnel
to pick up the airport.
Good Feedback from our Australian client who buy a low pressure PU polyurethane foaming machine.
