|
[China]
Trade Verify
Address: Room 101, No. 21, Huayuanzai Road, Chongmei, Chashan Town, Dongguan City, Guangdong Province
Contact name:Huang
Dongguan Linkun Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Product performance:
Ceramic gas discharge tube is the most widely used switching device
in lightning protection equipment. Whether it is lightning
protection for AC or DC power supplies or lightning protection for
various signal circuits, it can be used to discharge lightning
current into the earth. Its main characteristics are: large
discharge current, small inter-electrode capacitance (≤3pF), high
insulation resistance (≥109Ω), large breakdown voltage dispersion
(±20%), and slightly slower reaction speed (the shortest is
0.1~0.2μs). ). According to the number of electrodes, there are two
types: diode discharge tubes and triode discharge tubes (equivalent
to two diode discharge tubes connected in series). Its appearance
is cylindrical, and it has two structural forms: with and without
leads (some also have a protection card for short circuit when
overheating).
Glass-sealed discharge tube (product description) Micro surge
absorber is an overvoltage protection device that suppresses
abnormal high-voltage pulses and protects low-voltage circuits from
damage by instantaneous high-voltage (such as lightning,
high-voltage noise from the power grid, high-voltage static
electricity, etc.) . It is a guided protection component developed
using the principle of micro-gap discharge and the activation of
semiconductor chips. It has the advantages of fast response, impact
resistance, stable performance, good repeatability and long life.
A semiconductor discharge tube (also called a solid discharge tube)
is a PNPN component, which is regarded as a free voltage-controlled
thyristor without a gate electrode. When the voltage exceeds its
off-state peak voltage (or avalanche voltage) When the
semiconductor discharge occurs, the transient voltage will be
clamped to within the switching voltage (or breakover voltage)
value of the component. When the voltage continues to increase, the
semiconductor discharge tube enters the conduction state due to the
negative resistance effect. Only when the current is less than the
holding current, the component resets and returns to its high
impedance state.
Size Of The Surface Mount Ceramic Gas Discharge Tube 5.0x4.2mm 5DS (mm)
Cautions and warnings
* Surge arresters must not be operated directly in power supply networks.
* Surge arresters may become hot in case of longer periods of current stress (danger of burning).
* Surge arresters may be used only within their specified values. In case of overload, the lead contacts may fail or the component may be destroyed.
* Damaged surge arresters must not be re-used.
Specification Of The Surface Mount Ceramic Gas Discharge Tube 5.0x4.2mm 5DS
| Catalog No. | DC Spark Over Voltage (100v/s)V | Impulse Spark Over Voltage (1kv/μs)V | Insulation Resistance GΩ | Electrode Capacitance 1MHz 0.5V PF | Impulse Discharge Current (8/20μs 10times) | AC Discharge Current (50Hz 1s 10times)A |
| 5DS075L | 075±20% | ≤600 | ≥1 | ≤1 | 5KA | 5A |
| 5DS090L | 090±20% | ≤600 | ≥1 | ≤1 | 5KA | 5A |
| 5DS150L | 150±20% | ≤600 | ≥1 | ≤1 | 5KA | 5A |
| 5DS230L | 230±20% | ≤700 | ≥1 | ≤1 | 5KA | 5A |
| 5DS350L | 350±20% | ≤1000 | ≥1 | ≤1 | 5KA | 5A |
| 5DS420L | 420±20% | ≤1000 | ≥1 | ≤1 | 5KA | 5A |
| 5DS470L | 470±20% | ≤1200 | ≥1 | ≤1 | 5KA | 5A |
| 5DS600L | 600±20% | ≤1000 | ≥1 | ≤1 | 5KA | 5A |
| 5DS800L | 800±20% | ≤1200 | ≥1 | ≤1 | 5KA | 5A |
Advantages Of The Surface Mount Ceramic Gas Discharge Tube 5.0x4.2mm 5DS
A gas- discharge tube is usually a glass tube with two electrodes
sealed through its walls. When a voltage is applied to the two
electrodes and the pressure of the gas in the tube is reduced,
eventually a pressure is reached at which a current flows, and the
gas begins to glow.
* Very high current-handling capability
* Low capacitance
* High insulation resistance
Gas Discharge Tube is a solid discharge tube made of alkaline ceramic material, which is designed to protect electrical and electronic circuits from over-voltage transients. It is typically used as a spark gap arrester for DC spark over voltage, impulse discharge current, and surge current protection. It comes with 3 pins, and is 8x10mm in size. It features 230V (100v/s) DC spark over voltage, 10KA (8/20μs 10times) impulse discharge current, and 8x10mm surge current protection.
The Gas Discharge Tube is reliable and safe to use, and is constructed with high-quality ceramic material, making it suitable for a wide range of applications in electrical and electronic circuits. It is also a cost-effective solution for providing reliable over-voltage protection.
Our Gas Discharge Tube is a reliable and cost-effective solution to protect your electrical and electronic circuits from over-voltage transients. It is made of high-quality ceramic material, and is suitable for a wide range of applications. Get your Gas Discharge Tube today and ensure reliable over-voltage protection for your electrical and electronic circuits!
| Property | Specification |
|---|---|
| Mounting Type | Surface Mount |
| Impulse Discharge Current | 10KA (8/20μs 10times) |
| Insulation Resistance | ≥1GΩ |
| Electrode Capacitance 1MHz 0.5V | ≤1.5PF |
| Type | GDT |
| Impulse Spark Over Voltage (1kv/Μs) | ≤600V |
| Surge Current | 8x10mm |
| Suppressor Type | 3 Electrode Gas Discharge Tube |
| Maximum Surge Current | 10 KA |
| High Light | SMD 3 Gas Discharge Tube, 3 Pin GDT Gas Discharge Tube, 230V 20% 10kA Gas Tube Arrester |
| Keywords | Ceramic gas discharge tube, Three-pole discharge tube, Ceramic gas discharge tube |
LINKUN 8TL230M Gas Discharge Tube is a solid discharge tube designed with ceramic gas discharge tubes, manufactured in Dongguan, Guangdong, China, offering excellent insulation resistance, with 3 pins, maximum surge current of 10 KA and surge current of 8x10mm. It also features a low electrode capacitance of 1.5PF when tested with 1MHz 0.5V.
This LINKUN 8TL230M Gas Discharge Tube is suitable for a wide range of applications, from high-voltage power transmission to lightning protection and anti-surge protection. It is a reliable and cost-effective choice for any project that requires a solid gas discharge tube with excellent insulation resistance and surge current.
The LINKUN 8TL230M Gas Discharge Tube is a great choice for any application requiring a reliable and cost-effective solution. It offers excellent insulation resistance, maximum surge current of 10 KA, and low electrode capacitance of 1.5PF when tested with 1MHz 0.5V.
Whether you are looking for a reliable and cost-effective solution for high-voltage power transmission or lightning protection and anti-surge protection, the LINKUN 8TL230M Gas Discharge Tube is the perfect choice.
Welcome to LINKUN's custom services for Gaseous-Discharge Component
Our Gaseous-Discharge Tube, Glass sealed discharge tube (Model Number: 8TL230M) is made from the highest quality materials and can provide maximum Surge Current up to 10 KA, with 3pin, Impulse Discharge Current up to 10KA (8/20μs 10times), Electrode Capacitance 1MHz 0.5V ≤1.5PF, and Impulse Spark Over Voltage (1kv/Μs) ≤600V. We guarantee all of our products are from Dongguan, Guangdong, China.
If you are looking for customized Gaseous-Discharge Component services, please contact us. We are committed to providing you with the highest quality products and services.
We provide technical support and services for Gas Discharge Tube. Our services include online support, phone support, and onsite support. Our online support provides customers with access to product documentation, FAQs, and troubleshooting guides. Our phone support provides customers with assistance from trained technicians. Our onsite support provides customers with an onsite technician to assist with installation, repair, and maintenance. We also offer extended warranties and preventative maintenance contracts.
Gas Discharge Tube products are packaged in accordance with the requirements of the customer. The product must be packaged properly to avoid damage during transit. The following guidelines should be followed when packaging and shipping Gas Discharge Tube products:
