|
[China]
Trade Verify
Address: Room 101, No. 21, Huayuanzai Road, Chongmei, Chashan Town, Dongguan City, Guangdong Province
Contact name:Huang
Dongguan Linkun Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Product performance:
Ceramic gas discharge tube is the most widely used switching device
in lightning protection equipment. Whether it is lightning
protection for AC or DC power supplies or lightning protection for
various signal circuits, it can be used to discharge lightning
current into the earth. Its main characteristics are: large
discharge current, small inter-electrode capacitance (≤3pF), high
insulation resistance (≥109Ω), large breakdown voltage dispersion
(±20%), and slightly slower reaction speed (the shortest is
0.1~0.2μs). ). According to the number of electrodes, there are two
types: diode discharge tubes and triode discharge tubes (equivalent
to two diode discharge tubes connected in series). Its appearance
is cylindrical, and it has two structural forms: with and without
leads (some also have a protection card for short circuit when
overheating).
Glass-sealed discharge tube (product description) Micro surge
absorber is an overvoltage protection device that suppresses
abnormal high-voltage pulses and protects low-voltage circuits from
damage by instantaneous high-voltage (such as lightning,
high-voltage noise from the power grid, high-voltage static
electricity, etc.) . It is a guided protection component developed
using the principle of micro-gap discharge and the activation of
semiconductor chips. It has the advantages of fast response, impact
resistance, stable performance, good repeatability and long life.
A semiconductor discharge tube (also called a solid discharge tube)
is a PNPN component, which is regarded as a free voltage-controlled
thyristor without a gate electrode. When the voltage exceeds its
off-state peak voltage (or avalanche voltage) When the
semiconductor discharge occurs, the transient voltage will be
clamped to within the switching voltage (or breakover voltage)
value of the component. When the voltage continues to increase, the
semiconductor discharge tube enters the conduction state due to the
negative resistance effect. Only when the current is less than the
holding current, the component resets and returns to its high
impedance state.
| Catalog | DC breakdown | Impulse | Insulation | Electrode | Impulse | AC Discharge |
| No. Catalog | voltage DC Spark Over | Spark Over | Resistance | Capacitance | Discharge Current | Current |
| Voltage (1kv/us) V | GA | 1MHz | (8/20μs 10times) | (50Hz 1s 10times) A | ||
| 0.5V PF | ||||||
| 5TS075L | 075±20% | ≤600 | ≥1 | ≤1.5 | 5KA | 5A |
| 5TS090L | 090±20% | ≤600 | ≥1 | ≤1.5 | 5KA | 5A |
| 5TS150L | 150±20% | ≤600 | ≥1 | ≤1.5 | 5KA | 5A |
| 5TS230L | 230±20% | ≤700 | ≥1 | ≤1.5 | 5KA | 5A |
| 5TS350L | 350±20% | ≤1000 | ≥1 | ≤1.5 | 5KA | 5A |
| 5TS420L | 420±20% | ≤1000 | ≥1 | ≤1.5 | 5KA | 5A |
| 5TS470L | 470±20% | ≤1200 | ≥1 | ≤1.5 | 5KA | 5A |
| 5TS600L | 600±20% | ≤1400 | ≥1 | ≤1.5 | 5KA | 5A |
| 5TS800L | 800±20% | ≤1600 | ≥1 | ≤1.5 | 5KA | 5A |
Ceramic gas discharge tube
●Reference implementation standards: ITU-T K.12, GB/T9043-2008
"General Technical Conditions for Gas Discharge Tubes for
Overvoltage
Protection of Communication Equipment". Reference executive
standard: ITU-T K. 12, GB/T9043-2008 (General Technical
Requirements of Gas Discharge Tubes for the
●The maximum AC (50Hz) current resistance is 5A. During the test, the AC voltage should be greater than the upper limit of the DC breakdown voltage.
●The test frequency of inter-electrode capacitance is 1MHz, and the
test voltage is 0.5V.
Packaging
The product is packed in blister box, 100PCS/box, 4000PCS per
carton. Automaton taped 100PCS per reel, 4000PCS per carton.
Gas Discharge Tube is a gaseous-discharge component, also known as a gas-discharge device, used to protect electrical circuits from over-voltage or surges. It operates by using the spark gap between two electrodes to control the flow of current, and is a solid discharge tube that can be quickly triggered by high voltage. Gas Discharge Tube is ideal for providing surge protection and electrostatic discharge protection for home appliances, electrical equipment, and other electronics. It can withstand a maximum surge current of 10 KA and a DC spark overvoltage of 230V (100V/s), as well as an impulse discharge current of 10KA (8/20μs 10times) with an electrode capacitance of 1MHz 0.5V ≤1.5PF. This Gas Discharge Tube is a three-pin device with reliable performance, making it a perfect choice for surge protection.
| Product Name | Ceramic Gas Discharge Tube GDT |
|---|---|
| AC Discharge Current | 10A(50Hz 1s 10times) |
| Insulation Resistance | ≥1GΩ |
| Mounting Type | Surface Mount |
| Suppressor Type | 3 Electrode Gas Discharge Tube |
| High Light | SMD 3 Gas Discharge Tube, 3 Pin GDT Gas Discharge Tube, 230V 20% 10kA Gas Tube Arrester |
| Surge Current | 8x10mm |
| Impulse Spark Over Voltage (1kv/Μs) | ≤600V |
| Type | GDT |
| Number Of Pin | 3pin |
| Diode discharge tube | Yes |
| Gaseous-Discharge Component | Yes |
| Gas-Discharge Component | Yes |
The LINKUN 8TL230M Gaseous-Discharge Component is a gas-discharge device designed to protect sensitive electronic equipment from power surges. It offers surge-protection and is a surface mountable gaseous-discharge tube featuring a DC spark over voltage of 230V (100v/s), a maximum surge current of 10KA and an AC discharge current of 10A (50Hz 1s 10times) with 3 pins.
This reliable gas-discharge component is designed to be used in a wide range of applications, including computers, home appliances, industrial equipment, and communications systems. It provides superior protection against voltage spikes and lightning strikes, and is ideal for use in harsh environments due to its high surge capability.
The LINKUN 8TL230M Gaseous-Discharge Component is the perfect choice for anyone looking for reliable surge-protection. With its high-quality design, superior surge-current capability, and low power consumption, it is the ideal choice for any application.
Our gas discharge tube is a gaseous-discharge component, a type of semiconductor discharge tube, also known as a gaseous-discharge tube. It is characterized by its high reliability and excellent protection performance. It is suitable for applications such as surge protection and electrical circuit protection.
Gas Discharge Tube technical support and service includes:
Gas Discharge Tube products should be packaged appropriately for shipping. Packaging materials should be designed to protect the product from damage and prevent contamination. Appropriate shipping containers and pallets should be used to ensure that the product arrives in a safe and secure condition.
A: A Gas Discharge Tube (GDT) is an electrical protection device that acts as a switch when a voltage reaches a certain threshold. LINKUN's 8TL230M GDT is used to protect equipment from damage due to high voltage transients.
A: The Brand Name is LINKUN and the Model Number is 8TL230M.
A: LINKUN's 8TL230M GDT is manufactured in Dongguan, Guangdong, China.
A: The rated voltage of LINKUN's 8TL230M GDT is 230V, and its rated current is 0.8A.
A: The surge current rating of LINKUN's 8TL230M GDT is 10kA.
