Xinxiang Jinshikang Medical Equipment Co., Ltd. |
China Facemask 3 Ply Earloop Masque Doctor Disposable Medical Face Mask
CE approved high quality disposable China medical supplies face mask is made of 3-layers,inside and outside layers are PP nonwoven,middle layer is high standard N98 filter paper.
Products Advantages
1. Dispsoable plain face mask,Size:17.5x9.5cm,3-PLY.
2. Very low resistance to breathing,free from foreign smell,without any stimulating feeling.
3. Nose bar can be adaptable,comfortable,without glass fibres,latex
free.
4. PFE(Filtration efficiency of non oily particles)≥30%.
5. BFE(Bacteria filtration efficiency)≥99%
6. Use ultrasonic welding technology, comfortable wearing.
Indications
1.Sterile products are used for hospital clinical medical personnel and patients.
2.Non-sterile products can be used for dust-free workshop,, hospital, laboratory, food industry, electronic manufactures and so on.
3.To prevent the spread of body fluids and blood splash content and isolate dust, particle, alcohol, blood, bacteria.
Normal packing of medical supplies face mask
Non sterile,10pcs per PE bag,2000pcs(200 bags)/ctn, carton
size:52x41x36.5cm
Advantages of disposable masks
Extremely aerated; Toxic gases need to be filtered; Heat
preservation is required; Can be soft; Need to breathe;
Flexibility; Will shock; Feel very good and quite hard; Compared
with other masks, the texture is relatively light; Very elastic and
can be reduced by shearing; The price is relatively low, suitable
for mass production
There are a variety of disposable dust masks, free choice must be
based on different market needs and working conditions.
Should choose freely according to dust concentration and toxicity
above all. According to GB/T18664 "Free Selection, Application and
Assurance of Defecation Protection Products", as a half mask, all
dust masks are suitable for the environment where the concentration
of harmful substances is not up to 10 times of the occupational
recognition limit, otherwise they should be applied to the full
mask or the respirator with higher waterproof level.
If the particulate matter is classified as highly toxic,
carcinogenic and radioactive, the filter material with the lowest
efficiency should be freely selected.
If the particulate matter is oily, be sure to choose a limited
filter material.
If the particles are needle-like fibers, such as slag wool,
asbestos, glass fiber, etc., the dust respirator cannot be washed,
and the respirator stuck with tiny fibers will easily cause facial
irritation in the sealing part of the face, so it is not suitable
for use.
For the high temperature and high humidity environment, it is more
comfortable to choose the mask with exhalation valve freely. The
mask with ozone can be used as welding mask to obtain optional
waterproof, but if the ozone concentration is lower than 10 times
the occupational health standard, the mask can be replaced with
dust and toxic filter elements. For the environment that does not
have particulate matter, but only does not have some peculiar
smell, free choice of dust mask with activated carbon layer is much
lighter than wearing gas mask, such as some laboratory environment,
but because of the national standard does not develop the technical
performance specification of this kind of mask.