NSHA220YT Projector Lamp For Acto ASK LX655W LX665W C1350 C1400

Projector Lamp NSHA220YT Suitable For Acto/ASK LX655W LX665W C1350 C1400

 Original projector lamp NSHA220YT, compatible for LX655W, LX665W, LX651, LX644, LX653W, LX645, LX650, LX646, LX640I, LX643W, LX665, LX660, LX643, LX650, C1350, C1400, C1370 , All items are 100% new and pass the quality checked. And will be packaged in good condition before dispatch. 100% Brand New, Premium quality, high brightness, long life replacement projector lamp. High Quality projector lamps, Easy to install.The quality can be guaranteed and price is competitive.

Specifications:

If you want your Projector Lamps work longer, please Note:

1. Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.
2. Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or
while the lamp is on. The lamp is much more susceptible to damage while it is hot.
3. Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters
should be cleaned regularly.
4. Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.
5. Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode
decreases projector brightness but the lamp will last longer.
6. Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.

Warm Noted:
Be sure to use an NSHA220YT Projector Lamp for replacement.
Be sure to turn off the unit and unplug the power cord before replacing the lamp
The lamp remains hot after the unit is turned off with the TV.
If you touch the lamp, you may burn your fingers. When you replace the lamp
Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp
If you touch it, wipe off the fingerprints with a soft cloth