NP29LP M362W M362X M363W M363X NEC Projector Lamp Replacement

NP29LP M362W M362X M363W M363X NEC Projector Lamp Replacement

NP29LP Projector Bulb Compatible With NEC M362W M362WS M362X M363W M363X NP-M362W

NEC projector lamp NP29LP (UHP250W 1.0 E20.9) , brand New projector lamp, top quality with high brightness, lamp life up to 2500 hours, QC test of all projector lamps. Comptabile with M362W M362WS M362X M363W M363X NP-M362W NP-M362WJD NP-M363WJD. Our team provides the best quality products, to provide customers with 100% satisfaction quality service. We are willing to strengthen cooperation with each customer to create a better future.

Specifications: 

Warm Noted:

Be sure to use an ELPLP85 Projector Lamp for replacement.

Be sure to turn off the unit and unplug the power cord before replacing the lamp

The lamp remains hot after the unit is turned off with the TV.

If you touch the lamp, you may burn your fingers. When you replace the lamp

Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp

If you touch it, wipe off the fingerprints with a soft cloth

Installation:

1. Turn off the Projector and unplug the AC power cord.

2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.

3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.

4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.

5. Close the lamp cover, and then tighten the screws

6. Plug in the AC power cord.