24 Inch 300nits AR Industrial Touch Module Industrial Grade
Installation way of Touch Panel
- In order to make a touch panel work normally, please make sure that
the host device is grounded.
- All environmental characteristics listed above should be less than
1 atmospheric pressure.
- The touch panel must be assembled with LCD panel by VHB or other
materials, the control board should be fixed on LCM bezel or other
mechanical parts of the system and then be grounded; In ESD test,
the touch panel should work normally and there should be no damage
to the appearance, when no static electricity discharges. However,
irregular changes like display flickering are acceptable when
static electricity discharges.
- The touch panel may be damaged functionally or work unstably if the
panel are not be grounded though your system to earth.
- In order to make a touch panel work normally, power supply or power
adapter has to conform to IEC 62684.
Panel Brand
AUO/BOE/etcPanel Model
Panel Size
24.0"Panel Type
a-Si TFT-LCD, LCM
Resolution
1920(RGB)×1080, FHD, 100PPIPixel Format
RGB Vertical Stripe
Display Area
531.36(W)×298.89(H) mmBezel Opening
-
Outline Size
556(W)×323.2(H) ×21.26(D) mmSurface
Anti-Scatter, Hard coating (6H)
Brightness
250 cd/m² (Typ.)Contrast Ratio
1000:1 (Typ.) (TM)
Viewing Angle
89/89/89/89 (Typ.)(CR≥10) Display Mode
AMVA3, Normally Black, Transmissive
Best View on
SymmetryResponse Time
16/9 (Typ.)(Tr/Td)
Display Colors
16.7M 72% NTSCLamp Type
10S7P WLED , 30K hours , With LED Driver
Frequency
60Hz Touch Screen
PCAP, Air Bonding
Panel Weight
3.67/3.75Kgs (Typ./Max.)Application
-
-
- Signal Interface
- LVDS (2 ch, 8-bit) , 30 pins Connector
-
-
- Environment
- Operating Temp.: -10 ~ 60 °C ; Storage Temp.: -20 ~ 70 °C
Product in actual application example