Active Member
|
[China]
Address: Room 1520, Block 11, International E-Commerce Logistics Center, PingAn Road, PingHu Street, LongGang District, ShenZhen City, China 518111
Contact name:Steven YU
Witgain Technology Limited |
|
|
4 Layer Printed Circuit Board Blue Solder Mask OSP Treatment
PCB Main Features:
1 4 Layer customized printed circuit board.
2 OSP treatment Organic Solderability Preservatives.
3 1OZ copper on each layer.
4 Blue solder mask.
5 4 Layer with very precised line width&space.
6 ROHS, MSDS, SGS, UL, ISO9001&ISO14001 Certificated
7 Our product is customized product.
S1170G Material Data Sheet:
| S1170G | |||||
| Items | Method | Condition | Unit | Typical Value | |
| Tg | IPC-TM-650 2.4.24.4 | DMA | ℃ | 180 | |
| Td | IPC-TM-650 2.4.24.6 | 5% wt. loss | ℃ | 390 | |
| CTE (Z-axis) | IPC-TM-650 2.4.24 | Before Tg | ppm/℃ | 45 | |
| After Tg | ppm/℃ | 210 | |||
| 50-260℃ | % | 2.3 | |||
| T260 | IPC-TM-650 2.4.24.1 | TMA | min | 60 | |
| T288 | IPC-TM-650 2.4.24.1 | TMA | min | 60 | |
| Thermal Stress | IPC-TM-650 2.4.13.1 | 288℃, solder dip | -- | pass | |
| Volume Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ.cm | 5.65 x 107 | |
| E-24/125 | MΩ.cm | 2.71 x 107 | |||
| Surface Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ | 5.99 x 106 | |
| E-24/125 | MΩ | 4.44 x 106 | |||
| Arc Resistance | IPC-TM-650 2.5.1 | D-48/50+D-4/23 | s | 180 | |
| Dielectric Breakdown | IPC-TM-650 2.5.6 | D-48/50+D-4/23 | kV | 45+kV NB | |
| Dissipation Constant (Dk) RC52% | IPC-TM-650 2.5.5.9 | 1GHz | -- | 4.4 | |
| Dissipation Factor (Df) RC52% | IPC-TM-650 2.5.5.9 | 1GHz | -- | 0.01 | |
| Peel Strength (1Oz HTE copper foil) | IPC-TM-650 2.4.8 | A | N/mm | — | |
| After thermal Stress 288℃,10s | N/mm | 1.3 | |||
| 125℃ | N/mm | 1.1 | |||
| Flexural Strength | LW | IPC-TM-650 2.4.4 | A | MPa | 550 |
| CW | IPC-TM-650 2.4.4 | A | MPa | 450 | |
| Water Absorption | IPC-TM-650 2.6.2.1 | E-1/105+D-24/23 | % | 0.12 | |
| Flammability | UL94 | C-48/23/50 | Rating | V-0 | |
| E-24/125 | Rating | V-0 | |||
FAQ:
Q1: What is OSP
A1: The overall functionality of a PCB board depends upon the conductivity of copper tracks. These tracks tend to oxidize when exposed to the atmosphere, and creates problems when soldering during component placement. OSP or Organic Solderability Preservative does two things: temporarily protect exposed copper from being oxidized and improves solderability before component fixation (assembly).
OSP creates a very thin (100-4000 Angstroms) organic coating on the PCB board, which is a water-based chemical compound of ‘Azole family’ such as benzotriazoles, imidazoles, and benzimidazoles. This compound gets absorbed by the exposed copper and generates a protected film to prevent oxidization.
Advantages of OSP:
Low cost
Environment-friendly
Re-workable, but can’t take more than 2-5 rounds of reflow
soldering before degradation
It is lead-free and can handle SMT components easily
It provides a coplanar surface, well suited for tight-pitch pads
(BGA, QFP).
Disadvantages of OSP:
Not Good for PTH (Plated Through Holes)
Short Shelf Life, less than 6 month
Inspection is difficult as it is transparent and colorless
requires careful handling, as it’s susceptible to mechanical damage
OSP Surface Finish Process:
The OSP finishing process is composed of three major steps, including pre-cleaning and making the PCB board ready for smooth OSP coating application.
