Wuhan Huaying Electric Power Tech & Science Co.,ltd |
|
Cable Fault Detector xk2001
The normal operation of cable-communication and
electric transport completely rely on the good condition of
the
cable-circuit. Once the circuit breaks down and
without punctually examination and repairing, it will no doubt
trigger the
mass economic loss and bad social influence. So the
electric fault measuring testing instrument is a very
important tool. The
intellectual testing instrument uses multiple testing
methods and adopts the most advanced electronic devices and
with
computer and special electronic technology, combining
our company’s successful experience of long-time exploitation
on
cable-fault measuring testing instruments, and it is absolutely
of high tech, intelligence and abundant functions.
Our cable-fault detector is a testing device of good integrity.
It can test on the High Resistance Flashover Fault, Grounding
High and Low Resistance Fault, Short & Off Circuit on
the Cable Fault and Poor contact and etc. If being equipped
with
sounding method and locating instrument, it can exactly
detect the fault point. Furthermore, it especially applies to
test for
various power cable and communication cable.
Scope of application and using purpose
The instrument can test all kinds of electric cable(voltage of
1KV-35KV) and the Short Circuit, Grounding, Leakage of High
Resistance. High Resistance Flashover, Out Line and Bad
Contact fault on the local cables, frequency modulation
communication cables, coaxial cable and metal aerial cables.
It also can test the length of cable and the spread velocity
on the cable.
The longest testing distance is 32KM (100KM for the
open-wire line)
Testing .dead zone is 1M.
Resolution of reading is 1M
Power dissipation is 5VA
Service condition :
Environment temperature 0℃~+40℃
Terminal temperature -10℃~+50℃
Relative humility 90%RH
Dimension: 225×165×125mm3
Weigh: 2kg