Anti Corrosion Oil Tank 1000l Underground , 50cbm Fuel Oil Storage

50m3 Oil Station SF Underground Fuel Oil Storage Pressure Tank

Description

The 50m3 Oil Station SF Underground Fuel Oil Storage Pressure Tank of the gas station should be a horizontal steel oil tank. The thickness of the standard steel plate used for the tank wall should not be less than 5 mm. If the wall thickness of the oil tank is less than 5 mm, it cannot meet the buried strength and needs to be added the corrosion resistance required. Even if it does not collapse, the tank wall is often in a critical yield state, which will accelerate the natural corrosion of the tank, which is not conducive to the service life of the tank and the stability of the tanker.

Parameter

Precautions

1. The 50m3 Oil Station SF Underground Fuel Oil Storage Pressure Tank should be protected from internal and external corrosion. The outer surface of the oil tank should adopt an anti-corrosion protection layer not lower than the reinforced grade. In the low temperature season, the coating is cured slowly. In order not to hinder the volatilization of the solvent, the outer plastic cloth can also be replaced by glass cloth.

2. When the oil tank is likely to float up due to the action of groundwater or rain, measures to prevent the oil tank from floating should be adopted. When the oil tank is buried in a region with a high groundwater level, in the case of an empty tank, there is a danger of floating, and the pipeline connected to it may be pulled off, causing oil leakage or even a fire accident.

3. For directly buried oil tanks built in water source protection areas, protection measures against leakage and diffusion should be adopted for the oil tanks, and leakage detection facilities should be set up to prevent the oil tanks of gas stations from polluting groundwater sources and nearby rivers and coasts.

4. The entry hole of the buried 50m3 Oil Station SF Underground Fuel Oil Storage Pressure Tank should be equipped with an operation well to facilitate maintenance operations. The oil inlet pipe, oil outlet pipe, oil measuring hole, vent pipe and other joint pipes of the oil tank should be installed on the top of the oil tank, and the oil outlet joint pipe should be installed on the manhole cover. The oil inlet pipe of the oil tank should extend down to 0.2 meters from the bottom of the tank. This is mainly to avoid static sparks caused by oil splashing and unloading, which may cause fire.

Our service

We can provide you with high quality products. Quality service. And accept customer according to your request. If you have any questions. please tell me. I will fix it for you as soon as possible.Warm-hearting service to help you find suitable stainless steel storage tank. Choosing best shipping agent for arranging the shipping.