High Hardness Stainless Steel Blade 2000mm Long With Four Edges For
A. Various standard blade molds are available from stock.
Non-standard specifications can be
customized and processed according to the drawings provided by
B. Due to the variety and variety of products, the map may not have
what you need, but as long as
you can tell what you need; or provide drawings to us, we can
deliver qualified products to your hands.
If you need help, please call us.
General specifications, off-the-shelf, non-standard can be
customized according to the drawings;
● Material: 6CrW2Si; W18Cr4V; 9CrSi; skd11; SHH; sk2; sk4; cpm15v;
vpm10v; m2; m35; 9cr18;
9cr18v; j420; 3cr13; 4cr13 and other high-quality raw materials
● Service: maintenance of various types of knife and mold,
consultation, etc., as well as hotline
technical support, including the query of common specifications of
The products are all made of high-quality alloy raw materials, with
sharp edge, wear resistance,
uniform hardness and smooth cut.
A wide range of products, specifications: round blades, shearing
machine blades, bending machine
molds, cutting machine blades, food industry blades, plastic
machinery blades, rubber machinery
blades, forestry machinery blades, carton mechanical blades, saw
blades, special-shaped machinery Blades and other blade molds,
contact us for details.
Maintenance method of shearing machine blade:
Operate in strict accordance with the operating procedures.
2, before each start-up according to the lubrication chart
requirements, fgbn1mh fixed point,
quantitative lubrication, oil should be clean without
3. The blade of the shearing machine must always be kept clean and
unpainted part of the anti-rust
4. Lubricating oil in the motor bearing should be replaced
regularly, and often check whether the
electrical part is working safely and reliably.
5. Regularly check whether the V-belt, handle, knob and button of
the shearing machine are damaged.
If the blade of the shearing machine is seriously worn, it should
be replaced in time and reported to be spare parts.
6. Regularly check the repair switch, insurance, and handle to
ensure reliable operation.
7. 10 minutes before work every day, lubricate the machine and
lubricate the machine.
8. It is strictly forbidden for non-designated personnel to operate
the equipment. It is usually necessary
to stop the person from leaving the machine.
9. Select the shear gap according to the thickness of the board.
10, the board can not be contaminated with impurities.
11. Avoid cutting and welding old boards.
12. Avoid over-limit shearing thick plates. Timing the upper and
lower blade gaps.
shearing machine type for blade:
The shearing machine is divided into a hydraulic shearing machine
and a mechanical shearing
machine as well as a gate shearing machine. In the process of using
the shearing machine,
remember not to overload the machine. Check the hydraulic parts and
hydraulic lines regularly. Also
check the gap between the blade and the blade of the shearing
machine frequently. If the blade is not sharp, replace it in time.
In order to increase the service life of the shearing machine and
the shearing machine blade.
blades suitable for the shearing mchine:
DURAMA blades for Hydraulic shearing machine;
Blades for Mechanical Cutting Machine .
HACO blades for hydraulic shearing machine.
AMADA blades; LVD blades.
Blades for hydraulic cutting machine
Blades for hydraulic guillotine machine
Blades for mechanical guillotine machine
Blades for plate cutter.
Heat treatment: to reliable condition
R&D: self designed upon client's requirements, or following
Delivery Time : Within 20 days
ISO 9001-2000 Certification
Material And Hardness:
1. 6CrW2Si HRC55~60
2. Material : Cr12MoV, HRC55~60
|DRS-6X2500||1300X80X20, X4pcs||9CrSi/ 6CrW2Si / Cr12Mo|
|DRS-6X3200||1100X80X20, X6pcs||6CrW2Si / Cr12Mo|
Steel-making-Blanking-Forging Steel-Rough Progressing-Heat
Packaging & Delivery:
Packaging Detail:wooden cases
Delivery Detail:25-45 Days
More information please contact us: