12M Light Pole Welding Machine Shut Welding Seam 3m/min With Gas Shield Welding

12M Light Pole Welding Machine Shut Welding Seam 3m/min With Gas Shield Welding

Specifications of light pole welding machine:

Semi-automatic Pipe Welding Machine
1 Using submerged arc welding
2 Welding speed 1-3m/min
3 Non-polluting

Semi-automatic Pipe Welding Machine

Descroption for street light pole shut welding machine:

This machine adopts submerged arc welding without luminous welding speed is quick.

It is easy and quick for the polygon pole with manual adjustment; Welding power is from

shanghai welding factory; the welding is continuous and beautiful and also with strong

penetration; From in one time; The welding efficiency is high and the speed is 1 to

3 meters per minute; It is three times to the gas shielded welding; The welding cost is

less than gas shielded arc welding; It is the fastest and lowest price equipment;

Feature:
1 semi-automatic submerged arc welding production lines widely used in all kinds of

steel pipe; round-and-cone; polygon-high poles such as the welding seam sheet;

2; Using submerged arc welding; surface smooth; non-polluting; non-luminous;

open-length welding; welding speed 2-3m/min; With high-speed welding; less investment

and savings wire; a particularly low price; the advantages of simple operation;

Information of the light pole shutting machine:

Light pole seam close-welding machine:LPW-340/16000
This machine is used to welding light pole column after bending. It will close the pole seam

and weld the seam automatically.This is one unit machine in whole light pole production line.
The machine has hydraulic station,welding system,pulling trolley and machine body etc.
Through the hydraulic station,the power will push cyliner.the extension of cyliner will close

the 8 sets of clamping wheels by chain to finish closing seam.Same time,the pull trolley will

pull the light pole to move forward and welding system to weld seam automatically.
For welding system,there are two welding functions, submerge welding+CO2 protection welding.

The user can choose anyone of them and easy to change.

Parameters of light pole shut welding machine:

1. Welding diameter:60-400mm
2. Welding length:16000mm as per requests
3. Welding thickness of pole:2.8-6mm
4. Power of pump motor:4KW
5. Power of pulling trolley motor:4KW AC motor with speed adjustable
6. Welding machine:630A with submerge ARC welding+Gas shielded welding functions
7. Welding wire diamater:1.2 mm or 1.6mm as per the thickness of light pole
8. welding speed: 1.1-2m/min
9. Weight of machine:6100Kgs
10. Overall sizes:22000x1800x1800mm
 

 
Machine photo: