|
[China]
Trade Verify
Address: Room 202, D07 building SISP, Hunnan District, Shenyang
Contact name:Kevin
Shenyang iBeehive Technology Co., LTD. |
|
Verified Suppliers
|
|
|
low cost prefabricated structural steel warehouse
Products Description
Structural steel fabrication can be a industrial, agricultural or
commercial building for storage or production of goods, often have
cranes and forklifts for moving goods around the structures.
It requires easily transported, fast assembled without skilled
labor, without affecting the quality and durability. And design
allows for strength and sturdiness, protection against earthquakes
and wind, and is relatively cheaper when compared to other material
building. Structural steel fabrication widely applied to warehouse,
factory, workshop, storage, garage, hangar, etc., also you can add
the partition wall or first floor( second floor) according to
multi-purpose.
| Main steel frame | H section steel beam and columns, painted or galvanized, galvanized C section or steel pipe |
| Secondary frame | hot dip galvanized C purlin , steel bracing , tie bar , knee brace , edge cover etc. |
| Roof panel | EPS sandwich panel,glass fiber sandwich panel,rock wool sandwich panel,and PU sandwich panel or steel sheet |
| Wall panel | Sandwich Panel or Corrugated Steel Sheet |
| Tie Rod | Circular Steel Tube |
| Brace | Round Bar |
| Knee Brace | Angle Steel |
| Roof Gutter | Color Steel Sheet |
| Drawing | We can make the design and quotation according to your require or your drawing |
| Certification | ISO9001:2000,CE. |
Single span, double span, multi span, single slope, double slope, multi slope etc
QHHK is a comprehensive enterprise which integrates design, production, processing, logistics, transportation and construction in the steel structure construction industry. It has 23 production lines of various types of steel structures and plates, covering the production and processing of all materials in the steel structure construction industry. And has obtained ISO 9001 international quality management system certification, steel structure, color steel plate, integrated housing CE certification.
Steel amount:7000tons.
Type: warehouse
Project time: 2018
Project location: Shenyang
Quantity:55000Sqm
Project size:16538.80Sqm
Steel Structure Quantity: 496.2tons
Dead Loading:0.4KN/m2
Live loading:0.5KN/m2
Wind load: 0.45kn/m2
Project size:7062.90Sqm
Steel Structure Quantity: 277.9tons
Dead Loading:0.3KN/m2
Live loading:0.5KN/m2
Wind load: 0.55kn/m2
------ Why Choose Us -------
Advantages
(1). Free to design architectural drawings for you;
(2). Features: Fast and flexible to assemble, safe, thermal and
noise insulation, water proof and fire prevention;
(3). Cost-effective: Fast and easy installation greatly shorten the
construction time which reduce the costs;
(4). Durability: The whole structure is easy in maintenance, which
can be used for more than 50 years.
(5). Perfect design: Perfect design completely avoids leaks and
water seepage. Meanwhile, it's also in line with the national level
of fire prevention.
(6). Carrying capacity: can resists the impact of strong wind and
seismic performance and bears heavy snow loads
1.Designing Ability
With help of modern designing softwares such as Auto CAD, PKPM,
3D3S, SAP2000, TSSD, Tekla Structures (Xsteel), 3DS MAX. We provide
full designing and detailing service to all customers.
We purchase the best quality raw material from An steel Co., Ltd.
We have 2 modern factories with a total area of 21000 square meters
to produce.
Normal the goods will be shipped by use 40’ open top container and 40’ HQ container. If use 40’HQ, it need to do a steel pallet to pack the goods, then the whole pallet cargo will be pushed into container together, when you unload the goods, you wold pull the whole pallet out of the container. In this case, the ocean freight will be cheaper, but will increase the cost of pallet. Regarding the open top containers, all the goods will be loaded one by one. In this case, the sea freight of 40’OT is higher than 40’HQ, but The steel pallet for 40’HQ need to be charged. You can tell me your prefer.
We reply each inquiry within 24 hours develop and make new parts according to customers' requirements and detailed information. provide service of designing, engineering, manufacturing and installation. Our expert technicians can help you to assemble the project at site.
FAQ
1. You are manufacture factory or trading company?
We are a factory. You are welcomed to visit us at any time.
The quality control flow and sales team will show you our
professionalism. Also you will can get best and most competitive
price
after visiting us.
2. Is your price competitive compared with other companies?
Our business objectives are to give the best price with same
quality and best quality with the same price. We will do everything
we can to reduce your cost and guarantee you get the best product
that you paid for.
3. Can you send engineers or whole team to install my project?
We will give detailed installation drawings for free. We can send
engineers as installation director or a team upon request.
4. Do you accept container loading inspection?
You are welcomed to send an inspector, not only for the container
loading, but any time during the production time.
5. Do you offer designing service for us?
Yes, we offer full set of drawing as your requirements. By using
AutoCAD, PKPM, MTS, 3D3S, Tarch, Tekla Structures (Xsteel) and
etc. we can design complex industrial building like office mansion,
super marker, auto dealer shop, shipping mall, 5 star hotel.
6. What is the lead time?
Lead time depends on order quantities. In general the delivery time
to nearest seaport in China will be 40 days after receiving
deposit.
7. How can you get a quotation for your projects?
You can contact us by email, phone, Alibaba TM, WhatsApp, Skype,
Viber and so on 24*7 and you will get reply within 8 hours.
