Active Member
|
[China]
Address: No.5, Taiwan Road, Zhangjiagang Bonded Area, Zhangjiagang City, Jiangsu Province, China
Contact name:John Chen
Zhangjiagang Bonded Area Henglong Steel Tube Co., Ltd. |
|
|
ASME SA333 Seamless steel pipes for low temperature service
Standard: ASTM A333 / ASME SA333
Steel grade: alloy steel
A 999/A 999M specification for general requirements for alloy steel pipe
| Grade 1 | Grade 3 | Grade 6 | |
| Carbon, max, % | 0.30 | 0.19 | 0.30 |
| Manganese, % | 0.40-1.06 | 0.31-0.64 | 0.29-1.06 |
| Phosphorous, max. % | 0.025 | 0.025 | 0.025 |
| Sulfur, max, % | 0.025 | 0.025 | 0.025 |
| Silicon | - | 0.18-0.37 | 0.10 min |
| Nickel | - | 3.18-3.82 | - |
Process: cold drawn seamless pipe
The tubes cover nominal (average) wall thickness.
Application: Tube for low temperature service
Dimensional range:
OD: 19.05-76.2mm
Any specific size is to be discussed before offer
The tube be 100% eddy current tested
Ultrasonic test is as option
Straightness ≤1mm/1000mm
Roughness: Ra ≤0.8
Mechanical properties
| Grade 1 | Grade 3 | Grade 6 | |
| Tensile strength, min, MPa | 380 | 450 | 415 |
| Yield strength, min, MPa | 205 | 240 | 240 |
| Transverse | Transverse | Transverse | |
Elongation in 2 in. or 50mm, (or 4D), min, %: Basic minimum elongation for walls 5⁄16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section | 25 | 20 | 16.5 |
| When standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used | 20 | 14 | 12 |
Test
If the test signals were produced by visual imperfections, the pipe may be accepted based on visual examination, provided the imperfection is less than 0.004 in. (0.1 mm) or 12½ % of the specified wall thickness (whichever is greater).
Visual imperfections:
Surface roughness
Straightener marks
Cutting chips
Steel die stamps
Stop marks, or
Pipe reducer ripple
Tubes shall be delivered with square cut ends. The ends are free of excessive burrs.
The tubes are bundled in the waterproof plastic sheet and packed in the wooden cases
The case is most suitable for hanging by forklift.
EN10204-3.1 MTC shall be issued
EN10204-3.2 MTC is as option
