TORICH INTERNATIONAL LIMITED |
Verified Suppliers
|
|
ASME SB466 UNS NO6600 Seamless Distiller Tubes Nickel Alloy 600 Tubes
Inconel 600 is a nonmagnetic nickel-chromium alloy with excellent resistance to oxidation and other forms of high temperature corrosion. This alloy also has excellent mechanical properties and presents desirable combination of high strength and good workability. Used for furnace and chemical-treatment components, in food processing, in nuclear engineering, and for engine and airframe components.
Chemical Composition
Grade | Ni% | Mn% | Fe% | Si% | Cr% | C% | Cu% | S% |
Alloy 600 | Min 72.0 | Max 1.0 | 6.0-10.0 | Max 0.50 | 14-17 | Max 0.15 | Max 0.50 | Max 0.015 |
Specifications
Grade | British Standard | Werkstoff Nr. | UNS |
Alloy 600 | BS 3075 (NA14) | 2.4816 | N06600 |
strongPhysical Properties
Grade | Density | Melting Point |
Alloy 600 | 8.47 g/cm3 | 1370°C-1413 °C |
Mechanical Properties
Alloy State | Tensile Strength | Yield Strength | Elongation | Brinell Hardness (HB) |
Annealing Treatment | 550 N/mm² | 240 N/mm² | 30% | ≤195 |
Solution Treatment | 500 N/mm² | 180 N/mm² | 35% | ≤185 |
Welding of Inconel 600
Any traditional welding procedures can be used to weld Inconel 600
to similar alloys or other metals. Before welding, preheating is
needed and also any stain, dust or mark should be cleared by steel
wire brush. About 25mm width to welding edge of base metal should
be polished to bright.
Recommend filler wire regarding welding Inconel 600: ENiCr-3