|
[China]
Trade Verify
Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Contact name:Richard SHEN
TORICH INTERNATIONAL LIMITED |
|
Verified Suppliers
|
|
|
This specification covers the requirements for seamless UNS C10200, C12000, or C12200 copper alloy tubes used for connection, repairs, or alternations of field air conditioning or refrigeration units. Materials in the form of billets, bars, or tubes should be used to produce a homogeneous uniform wrought structure by either hot or cold working. Each tube should be cold drawn to the finished size and wall thickness. Coiled lengths with soft annealed tempers should be bright annealed after coiling then dehydrated and either capped, plugged, crimped, or otherwise closed at both ends. Straight lengths with hard drawn tempers should be cleaned and either capped, plugged, or otherwise closed at both ends.
Application: For Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe
Technique: Cold Drawn
Size:
| OD | 5-30mm |
| WT | 0.3-2mm |
| LENGTH | Max12000mm |
GENERAL SPECIFICATIONS:
Cleanliness: Bore quality meets the 0.038g/m ASTM B280 specified limit
Material: C12200, Cu 99.9% min, P 0.015 – 0.040%
Mechanical Properties : Tensile Strength: 290 MPa (min) | Elongation: 3% | Hardness: >100 HV
Temper: Hard Drawn
Packaging: Bore internally cleaned and capped
Bending: Not suitable for bending
Length: Manufactured in 10ft lengths, other lengths available on request
Length: Manufactured in 10ft lengths, other lengths available on request
Scope
1.1 This specification establishes the requirements for seamless copper tube intended for use in the connection, repairs, or alternations of air conditioning or refrigeration units in the field.
NOTE 1: Fittings used for soldered or brazed connections in air conditioning and refrigeration systems are described in ASME Standard B16.22.
NOTE 2: The assembly of copper tubular systems by soldering is described in Practice B828.
NOTE 3: Solders for joining copper tubular systems are described in Specification B32. The requirements for acceptable fluxes for these systems are described in Specification B813.
1.2 The tube shall be produced from the following coppers, and the manufacturer has the option to supply any one of them, unless otherwise specified:
| Copper UNS No. | Previously Used Designation | Description |
| C10200 | OF | Oxygen free without residual deoxidants |
| C12000 | DLP | Phosphorus deoxidized, low residual phosphorus |
| C12200 | DHP | Phosphorus deoxidized, high residual phosphorus |
Product Show:
Q: Are you trading company or manufacturer?
A: We are a professional steel pipes materials manufacturer.
Q: How long is your delivery time?
A: Generally it takes 7-14 days if the goods are in stock or 30-60 days if there is no stock, this mainly depends on quantity.
Q: Do you provide free samples?
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T
in advance ,balance before shippment.
If you have another question, pls feel free to contact us.
