|
[China]
Trade Verify
Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Contact name:Richard SHEN
TORICH INTERNATIONAL LIMITED |
|
Verified Suppliers
|
|
|
ASME SB163 UNS N06601 Nickel Alloy Tubes for Heat Exchanger
Specification for seamless nickel and nickel alloy condenser and
heat exchanger tubes.
Keywords:
Seamless tube; UNS N02200; UNS N02201; UNS N04400; UNS N06025; UNS
N06045; UNS N06600;
UNS N06601; UNS N06603; UNS N06686; UNS N06690; UNS N08120; UNS
N08800; UNS N08801;
UNS N08810; UNS N08811; UNS N08825
Referenced ASTM Standard:
B 829 Specification for general requirements for Nickel and Nickel
Alloy seamless pipe and tube.
B 880 Specification for general requirements for Chemical check
analysis limits for Nickel, Nickel alloys and Cobalt alloys.
E 8 Test method for tension testing of metallic materials.
E 18 Test methods for rockwell hardness and rockwell superficial
hardness od metallic materials.
E 29 Practice for using significant digits in test data to
determine conformance with sprcifications.
E 76 Test methods for chemical analysis of Nickel-Copper alloys.
E 112 Test Methods for determining the average grain size.
E140 Hardness conversion tables for metal.
E 1473 Test methods for chemical analysis of Nickel, Cobalt and
high-temperature alloys.
Chemical requirements:
| Alloy | Ni | Cu | Mo | Iron | Mn | C (A) | Si (A) | S | Cr | Al |
| UNS N02200 | 99 min (B) | 0.25 max | ... | 0.40 max | 0.35 max | 0.15 max | 0.35 | 0.01 max | ... | ... |
| UNS N02201 | 99 min (B) | 0.25 max | ... | 0.40 max | 0.35 max | 0.02 max | 0.35 | 0.01 max | ... | ... |
| UNS N04400 | 63 min (B) | 28.0-34.0 | ... | 2.5 max | 2.0 max | 0.3 max | 0.5 | 0.024 max | ... | ... |
| UNS N06600 | 72 min (B) | 0.5 max | ... | 6.0-10.0 | 1.0 max | 0.15 max | 0.5 | 0.015 max | 14.0-17.0 | ... |
| UNS N06601 | 58.0-63.0 | 1.0 max | ... | remainder (A) | 1.0 max | 0.1 | 0.5 | 0.015 max | 21.0-25.0 | 1.0-1.7 |
| UNS N06690 | 58 min (B) | 0.5 max | ... | 7.0-11.0 | 0.05 max | 0.05 max | 0.5 | 0.015 max | 27.0-31.0 | ... |
| ....... |
Mechanical Properties:
| Material and Condition | Tensile Strenth, min, ksi (MPa) | Yield Strength (0.2% offset), min, psi (MPa) | Elongation in 2 in. or 50 mm (or 4 D) min, % | Rockwell Hardness (or equivalent) for annealed ends (A) |
UNS N02200 Annealed Stress-relieved |
55 (379) 65 (448) |
15 (103) 40 (276) |
40 15 |
... B65 max |
UNS N02201 Annealed Stress-relieved | | | | |
UNS N04400 Annealed Stress-relieved | | | |
... B75 max |
| UNS N06600 | 80 (552) | 35 (241) | 30 | ... |
| UNS N06601 | 80 (552) | 30 (207) | 30 | ... |
| UNS N06690 | 85 (586) | 35 (241) | 30 | ... |
| ...... | ... | ... | ... | ... |
Product Pictures:
