|
[China]
Trade Verify
Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Contact name:Richard SHEN
TORICH INTERNATIONAL LIMITED |
|
Verified Suppliers
|
|
|
Steel Grade/Steel Material/Steel Number:
STM-C-540 STM-C-640 STM-R-590 STM-R-690 STM-R-780 STM-R-830
Size Range:
OD: 5-420mm
WT: 0.5-50mm
MECHANICAL PROPERTIES min | |||
Steel grade | Tensile strength Mpa | Yeild point or proof stress Mpa | Elongation % |
STM-C-540 | 540 | - | 18 |
STM-C-640 | 640 | - | 16 |
STM-R-590 | 590 | 375 | 18 |
STM-R-690 | 690 | 440 | 16 |
STM-R-780 | 780 | 520 | 15 |
STM-R-830 | 830 | 590 | 10 |
Outside Diameter,wall Thickness and Mass (for casing Tube) | ||||
Nominal diameter | Outside diameter mm | Inside diameter | Wall thickness mm | Unit mass kg/m |
43 | 43 | 37 | 3 | 2.96 |
53 | 53 | 47 | 3 | 3.7 |
63 | 63 | 57 | 3 | 4.44 |
73 | 73 | 67 | 3 | 5.18 |
83 | 83 | 77 | 3 | 5.92 |
97 | 97 | 90 | 3.5 | 8.07 |
112 | 112 | 105 | 3.5 | 9.36 |
127 | 127 | 118 | 4.5 | 13.6 |
142 | 142 | 133 | 4.5 | 15.3 |
Outside Diameter,wall Thickness and Mass (for Core tube) | ||||
Nominal diameter | Outside diameter mm | Inside diameter | Wall thickness mm | Unit mass kg/m |
34 | 34 | 26.5 | 3.75 | 2.8 |
44 | 44 | 34.5 | 4.75 | 4.6 |
54 | 54 | 44.5 | 4.75 | 5.77 |
64 | 64 | 54.5 | 4.75 | 6.94 |
74 | 74 | 64.5 | 4.75 | 8.11 |
84 | 84 | 74.5 | 4.75 | 9.28 |
99 | 99 | 88.5 | 5.25 | 12.1 |
114 | 114 | 103.5 | 5.25 | 14.1 |
129 | 129 | 118.5 | 5.25 | 16 |
144 | 144 | 133.5 | 5.25 | 18 |
180 | 180 | 168 | 6 | 25.7 |
Outside Diameter,wall Thickness and Mass (for Drill Rod) | ||||
Nominal diameter | Outside diameter mm | Inside diameter | Wall thickness mm | Unit mass kg/m |
33.5 | 33.5 | 23 | 5.25 | 3.66 |
40.5 | 40.5 | 31 | 4.75 | 4.19 |
42 | 42 | 32 | 5 | 4.56 |
50 | 40 | 37 | 6.5 | 6.97 |
Characteristic:
Good Surface Quality
Good OD and ID tolerance controlled to Technical Standard
Stable quality
100% Eddy Current Test
TORICH QUALITY ASSURANCE
Production Processs:
Raw Material → Incoming Inspection → Storage → Cutting → Hammering → Pickling Lubrication → Cleaning→ Phosphorization → Clean → Lubrication → Cold Drawing/Cold Rolling → Middle Check → Heat Treatment → Straightening → Ends Cutting → Final Inspection → Bundling → Storage
Raw Material Tube:
Seamless Hollow Sections, produced by hot piercing or hot rolled.
