TORICH INTERNATIONAL LIMITED |
Verified Suppliers
|
|
Precision Steel Tubing EN10305-1 Gas Cylinder Tube Grade E355 E235
Standard: EN10305-1 Seamless Cold Drawn/Rolling Steel
Tubes
Steel Tubes for precision applications.
Applications: for Gas Cylinder Applications, Oil
Cylinders/Telescopic Cylinders
Size Range: O.D.:6-380mm
W.T.:1-35mm L:max12000mm
Steel Grade: E235, E355,E215 etc
Steel Grade and Chemical
Compositions:
Steel Grade | C | Si | Mn | P | S | Al | |
Steel Name | Steel Number | max | max | max | max | max | min |
E215 | 1.0212 | 0.10 | 0.05 | 0.70 | 0.025 | 0.025 | 0.025 |
E235 | 1.0308 | 0.17 | 0.35 | 1.20 | 0.025 | 0.025 | - |
E355 | 1.0580 | 0.22 | 0.55 | 1.60 | 0.025 | 0.025 | - |
Mechanical properties at room temperature | |||||||||||||
Steel Grade | Minimum values for the delivery condition | ||||||||||||
Steel Name | Steel Nubmer | (+Cc) | (+LCc) | (+SR) | (+Ad) | (+N) NBK | |||||||
Rm Mpa | A % | Rm Mpa | A % | Rm Mpa | ReH Mpa | A % | Rm Mpa | A % | Rm Mpa | ReH Mpa | A % | ||
E215 | 1.0212 | 430 | 8 | 380 | 12 | 380 | 280 | 16 | 280 | 30 | 290-430 | 215 | 30 |
E235 | 1.0308 | 480 | 6 | 420 | 10 | 420 | 350 | 16 | 315 | 25 | 340-480 | 235 | 25 |
E355 | 1.0580 | 640 | 4 | 580 | 7 | 580 | 450f | 10 | 450 | 22 | 490-630 | 355 | 22 |
Note: Special steel grade is also available, according to customer request.
aRm: tensile strength; ReH: upper yield strength; A: elongation after fracture
b 1Mpa=1N/mm2
c Depending on the degree of cold work in the finishing pass the
yield strength may nearly be as high as the tensile
strength.
For calculation purposes the following relations are
recommended:
for delivery condition +C: ReH ≥0.8 Rm
for delivery condition +LC: ReH ≥0.7 Rm
d For calclulation purposes the following relation is
recommended:ReH≥0.5Rm
e For tubes with outside diameter ≤30mm and wall thickness ≤3mm the
ReH minimim values are 10Mpa lower than the values given in this
Table
f For tubes with outside diameter>160mm:
ReH≥420Mpa