Home Companies TORICH INTERNATIONAL LIMITED

SAEJ525 DOM Steel Tube

Contact Us

[China]

Trade Verify

Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China

Contact name:Richard SHEN

TORICH INTERNATIONAL LIMITED

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

SAEJ525 DOM Steel Tube

Country/Region china
City & Province ningbo zhejiang
Categories Metal Slabs

Product Details

Quick Detail:

SAE J525 Welded Cold Draw Low Carbon Steel Tubing annealed for bending and flaring

Size range: O.D.:30-350mm W.T.:1-15mm L: 12000mm or Cut to Short Pieces as specified length

 

Applications: for Bending and Flaring, Auto Parts

 

Manufacture:

The tubing is made from flat-rolled steel shaped into a tubular form, the edges of which are joined and fused together by electric-resistance welding. After forming and welding, the tubing is normalized and subject to a cold-drawing operation that shall result in a 15% minimum reduction in cross-sectional are, of which 8% shall consist in a reduction in wall thickness. Sequent to cold working, the tubing shall be normaIized via an atmospherically controlled method to produce a finished product that will meet all requirement of SAJ525

 

Dimensions and Tolerances:

The tolerances applicable to the tubing outside diameter and inside diameter are shown in Table 1.

The tolerances applicable to the tubing wall thickness are shown in Table 2

Dimensional tolerances can only apply to two of the three tubing dimensions ( OD, ID, or wall)

Unless otherwise agreed upon between customer and us., dimensional tolerances shall apply to the tube OD and wall dimensions.

 

Table 1- TUBING OUTSIDE DIAMETER TOLERANCE
Nominal Tubing
OD mm
Tolerance
OD ±mm
Tolerance
ID ±mm
Up to 9.500.050.05
Over 9.50 to 15.88 inclusive0.060.06
Over 15.88 to 50.80 inclusive0.080.08
Over 50.8 to 63.50 inclusive0.100.10
Over 63.50 to 76.20 inclusive0.130.13
Over 76.20 to 100.00 inclusive0.150.15
WT tolerance shall be not more than 10%

 

 

Table 2- TUBING WALL THICKNESS TOLERANCE
Nominal
Wall Thickness
Nominal OD
Through 22mm
±mm
Nominal OD
22-48mm
±mm
Nominal OD
48-100mm
±mm
0.890.05/0.050.05/0.050.05/0.05
1.000.05/0.050.05/0.080.05/0.08
1.250.05/0.050.05/0.080.05/0.08
 
1.500.05/0.050.05/0.080.05/0.08
1.650.05/0.050.05/0.080.05/0.08
2.000.05/0.050.05/0.080.05/0.08
2.110.05/0.050.05/0.080.05/0.08
 
2.4100.05/0.050.05/0.080.08/0.08
2.5000.05/0.080.05/0.100.08/0.08
2.7700.05/0.080.05/0.100.08/0.08
3.0000.05/0.080.05/0.100.08/0.08
3.0500.05/0.080.05/0.100.08/0.08
 
3.40-0.05/0.100.08/0.08
3.75-0.05/0.100.08/0.08
4.00-0.08/0.100.08/0.10
4.19-0.08/0.100.08/0.10
4.57-0.10/0.100.08/0.13
5.00-0.10/0.130.10/0.13

 

 

Table 2- CHEMICAL REQUIREMENTS
Element%
Carbon0.06-0.18
Manganese0.30 to 0.60
Phosphpris0.040 max
Sulfur0.050 max

 

 

Table 3- MECHANICAL PROPERTIES
PropertiesValue
Yield Strength,min170 Mpa
Ultimate Strenth,min310 Mpa
Elongation in 50mm, min35%
Hardness ( Rockwell B),max65.00

 

Production Steel Tube:

 

 

 

 

 

Eddy Current Test and Ultrasonic Test:

 

Packing:

packing

Hot Products

Product Description TORICH ASTM A519 AISI4130 AISI4140 Seamless Alloy Steel Tubes Standard ASTM A519 ...
Quick Detail: SAE J525 Welded Cold Draw Low Carbon Steel Tubing annealed for bending and flaring ...
ASTM A485 High Hardenability Antifriction Bearing Steel 100CrMo7 Dimensions: diameter 10mm~110mm ...
Round steel tubes heat exchanger tubes ASTM A179 ASME SA179 Applications: for Boilers,Superheaters, ...
Black Coated Cold Drawn Seamless Carbon Steel Pipe ASTM A179 SA179 for Heat Exchanger Applications: ...
SA179 ST35.8 Mild Seamless Steel Round Pipe Thick Wall Pipe Boiler Chemcial Fertilizer Material: Low ...