|
[China]
Trade Verify
Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Contact name:Richard SHEN
TORICH INTERNATIONAL LIMITED |
|
Verified Suppliers
|
|
|
SAE J526 Welded Low Carbon Steel Tubing for Auto Refrigeration, Hydraulic
Application:covers welded single-wall low-carbon steel tubing intended for generalautomotive, refrigeration, hydraulic, and other similar applications requiring tubing of a quality suitable forbending, flaring, beading, forming, and brazing.
size:length--2~12m WT--2~4.5mm OD--16~50mm
Manufacture:The tubing shall be made from a single strip of steel shaped into a tubular form, the edges ofwhich are joined and sealed by a suitable welding process. After welding, the bead shall be removed from theoutside to provide a smooth round surface and the tubing shall be processed in such a manner as to producea finished product which will meet all requirements of this document. Typically this type of tubing is availablein both coiled and straight condition. Straightness requirements should be agreed upon between supplier andpurchaser.
Inspection items:
chemical composition
Tensile test
Ultrasonic examination
Eddy current flaw detection
Bending test
Flattening test
Permissible Tolerance of Outer Diameter and Wall Thickness (mm)
| Type of steel Tube | Dimension of steel tube | Permissible tolerance | ||
| Average class | High class | |||
Hot-rolled (extruded and expanded) tube | Outer diameter D | All | ±1% (min.+/-0.50) | - |
| Wall thickness | All | +15%/-12.5% (min.+4.5/-4.0) | - | |
| Cold-drawn (cold-rolled) tube | Outer diameter D | 6~10 | ±0.2 | ±0.15 |
| >10~30 | ±0.40 | ±0.20 | ||
| >30~50 | ±0.45 | ±0.30 | ||
| >50 | ±1% | ±0.8% | ||
| Wall thickness | <1 | ±0.15 | ±0.12 | |
| >1~3 | +15% -10% | +12.5% -10% | ||
| >3 | +12.5% -10% | ±10% | ||
| Note: For hot-expanded tubes with outer diameter>35mm,the permissible tolerance of wall thickness is±18%. | ||||
Longitudinal Mechanical Properties of Steel Tubes
| NO. | Steel Grade | Tensile Strength(Mpa) | Yield point(Mpa) | Elongation after breaking(%) | |
| s<16 | s>16 | ||||
| Not less than | |||||
| 1 | 10 | 335~475 | 205 | 195 | 24 |
| 2 | 20 | 410~550 | 245 | 235 | 20 |
| 3 | Q295 | 430~610 | 295 | 285 | 22 |
| 4 | Q345 | 490~665 | 325 | 315 | 21 |
Competitive Advantage:
Good source of raw material from Bao Steel.
Prompt delivery time according to PO and agreement.
Produce exactly according to standard and customer's requirement.
Experienced export team for customer service, quick reply within 24 hours.
Production Site:
Test Methods:
Tensile test
Flattening test
Drift expanding test
Dimensional inspection
Roughness measurement
Visual examincation
Not-destructive testing
a. Test for longitudinal imperfections-
- Eddy current test - EN10246-3, level E3
- ultrasonic testing - EN10246-7, level U3
b. Leak-tightness
- Non-destructive testing for verification of leak-tightness shall be carried out in accordance with EN10246-1
EN10305 Consists of the following Parts under the general title " Steel tubes for precision applications - Technical delivery conditions "
Part 1: Seamless Cold Drawn Tubes
Part 2: Welded Cold Drawn Tubes
Part 3: Welded Cold Sized Tubes
Part 4: Seamless Cold Drawn Tubes for Hydraulic and Pneumatic Power Systems
Part 5: Welded and Cold Sized Square and Rectangular Tubes
Part 6: Welded Cold Drawn Tubes for Hydraulic and Pneumatic Power Systems
Normative references:
EN10002-1, Metallic materials - Tensile Testing - Part 1: Method of test at ambient temperature
EN10020, Definition and classification of grades of steel
EN10021, General technical delivery requirements for steel and iron products
EN10027-1, Designation systems for steel - Part 1 : Steel names, principal symbols
EN10027-2, Designation systems for steel - Part 2: Numerical systems
EN10052, Vocabulary of heat treatment terms for ferrous products.
EN10204, Metallic products - Types of inspection documents
EN10233, Metallic materials - Tube - Flattening Test
EN10234, Metallic materials - Tube - Drift expanding test
EN10246-1, Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded ( except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
EN10246-3, Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for detection of imperfections
EN10246-5, Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetics transducer/flux leakage testing of seamless and welded ( expcept submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
EN10246-7, Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel.
EN ISO377, Steel and Steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
EN ISO 2566-1, Steel - Conversion of elongation values - Part 1: Carbon and Low alloy steels (EN102566-1:1984)
EN 10168, Iron and steel products - Inspection documents - List information and description
ENV10220, Seamless and welded steel tubes - Dimensions and masses per unit length
EN10266, Steel Tubes, fittings and structural hollow sections - Definitions and symbols for use in product standards
EN ISO 4287, Geometrical product specifications (GPS) - Surface Texture: Profile method - Terms, definition and surface texture parameters ( ISO 4287:1997)
