Home Companies TORICH INTERNATIONAL LIMITED

Precision Steel Hydraulic Cylinder Tube GB/T 24187 Cold Drawn For Evaporator

Contact Us

[China]

Trade Verify

Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China

Contact name:Richard SHEN

TORICH INTERNATIONAL LIMITED

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Precision Steel Hydraulic Cylinder Tube GB/T 24187 Cold Drawn For Evaporator

Country/Region	china
City & Province	ningbo zhejiang
Categories	Metal Casting Machinery

Product Details

TORICH GB/T 24187 Cold-Drawn Precision Single Welded Steel Tubes

Spec:
Material:C Si Mn P S
Size Range:OD:3.18-18mm
WT:0.3-1.3mm
General Length:1.5-4m
Tolerance:
According to the following tables or customers’ request.

Table 1 Outer diameter, wall thickness and theoretical weight

OD/mm	WT/mm
	0.30	0.40	0.50	0.60	0.65	0.70	0.80	0.90	1.00	1.30
	theoretical weight /(kg/m)
3.18	0.0213	0.0274	0.0330
4.00	0.0274	0.0355	0.0432	0.0503
4.76	0.0330	0.0430	0.0525	0.0616	0.0659	0.0701
5.00	0.0348	0.0454	0.0555	0.0651	0.0697	0.0742
6.00	0.0422	0.0552	0.0678	0.0799	0.0858	0.0915	0.1026	0.1132	0.1233
6.35	0.0448	0.0587	0.0721	0.0851	0.0914	0.0975	0.1095	0.1210	0.1319
7.94	0.0565	0.0744	0.0917	0.1086	0.1169	0.1250	0.1409	0.1563	0.1712	0.2129
8.00	0.0570	0.0750	0.0925	0.1095	0.1178	0.1260	0.1421	0.1576	0.1726	0.2148
9.53	0.0683	0.0901	0.1113	0.1321	0.1423	0.1524	0.1722	0.1915	0.2104	0.2639
10.00	0.0718	0.0947	0.1171	0.1391	0.1499	0.1605	0.1815	0.2020	0.2220	0.2789
12.00	0.0866	0.1144	0.1418	0.1687	0.1819	0.1951	0.2210	0.2464	0.2713	0.3430
12.70	0.0917	0.1213	0.1504	0.1790	0.1932	0.2072	0.2348	0.2619	0.2885	0.3655
14.00	0.1014	0.1342	0.1665	0.1983	0.2140	0.2296	0.2604	0.2908	0.3206	0.4072
15.88	0.1153	0.1527	0.1896	0.2261	0.2441	0.2621	0.2975	0.3325	0.3670	0.4674
16.00	0.1162	0.1539	0.1911	0.2279	0.2461	0.2641	0.3000	0.3352	0.3699	0.4713
18.00	0.1310	0.1736	0.2158	0.2575	0.2781	0.2987	0.3393	0.3795	0.4192	0.5354
Theoretical weight of no additional coating, density of steel is 7.85 kg/

Table2 Allowable deviation of outer diameter of steel pipe

Outer diameter	Common precision	High precision
＜4.76	±0.08	±0.05
4.76-8.00	±0.12	±0.07
＞8.00-12.00	±0.16	±0.10
＞12.00	±0.20	±0.12

Table 3 Permissible deviation of steel tube wall thickness

Wall thickness	Permissible deviation
＜0.70	±0.05
≥0.70	±0.07

Table 4 Allowable deviation of specified length of steel pipe

Length	Allowable deviation
≤2000	+4 0
＞2000-5000	+7 0
＞5000-8000	+10 0

TABLE 5 Chemical Composition Of Steel Strip (Mass Fraction)%

Category	C	Si	Mn	P	S
Cold rolled low carbon steel strip	≤0.08	≤0.03	≤0.30	≤0.030	≤0.030
Cold rolled ultra low carbon steel strip	≤0.008	≤0.03	≤0.25	≤0.020	≤0.030

TABLE 6 Mechanical Properties Of Cold Rolled Low Carbon Steel Strip

Thickness /mm	Tensile Strength	Yield Strength	Elongation A/%
0.25~＜0.35	≥270		≥32
0.35~＜0.50			≥34
≥0.50			≥36
a Replace with when the yield phenomenon is not obvious. b Sample type of sample number D14 in GB/T 228-2002.

TABLE 7 Mechanical Properties Of Cold Rolled Ultra-low Carbon Steel Strip

Thickness /mm	Tensile Strength	Yield Strength	Elongation A/%
≤0.50	≥280	130~250	≥38
＞0.50	≥280	130~250	≥40
a Replace with when the yield phenomenon is not obvious. b Sample type of sample number P14 in GB/T 228-2002.

TABLE 8 Mechanical properties of steel pipe

Category	Tensile Strength	Yield Strength	Elongation A/%
Ordinary steel pipe(MA)	≥270	≥180	≥14
Soft steel tube(MB)	≥230	150~220	≥35
a Replace with when the yield phenomenon is not obvious. b Sample type of sample number S7 in GB/T 228-2002.

Characteristic:

TORICH QUALITY ASSURANCE

Good surface quality

Good OD and ID tolerance controlled to Technical Standard
Stable quality
100% Eddy Current Test

Processing:W-H W-C

Widely used in the field of:Condenser, evaporator, cooler tube fuel pipe of refrigeration,automobile and electric appliance industrial

Product Images:

QUALITY CONTROL

1~ Incoming Raw Material Inspection
2~ Raw Material Segregation to avoid steel grade mix-up
3~ Heating and Hammering End for Cold Drawing
4~ Cold Drawing and Cold Rolling, on line inspection
5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T
6~ Straightening-Cutting to specified length-Finished Measuring Inspection
7~ Machanical Testing in own labs with Tensile Strength, Yield Strength, Elongation, Hardness, Impact, Mictrostruture etc
8~ Packing and Stocking.

100% of our steel tubes are dimensionally checked
100% of our steel tubes are visually checked to assure they have a perfect surface condition and no surface defects.
100% eddy current test and ultrosonic test to eliminate longitudinal and transversal defects.