|
[China]
Trade Verify
Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Contact name:Richard SHEN
TORICH INTERNATIONAL LIMITED |
|
Verified Suppliers
|
|
|
Seamless Stainless Steel Pipes for Fluid Transportation GB/T 14976
Spec:
Material:
Size Range:OD:4-1200mm
WT:0.3-200mm
General Length:1-12m
Tolerance:
According to the following tables or customers’ request.
Table 1 The Tolerance of Outer Diameter and Wall Thickness Unit:mm
| Hot rolling(extrusion,expansion) steel tube | Cold drawn(rolling)steel tube | ||||||
| Diamension | Tolerance | Diamension | Tolerance | ||||
| Ordinary Grade PA | High Grade PC | Ordinary Grade PA | High Grade PC | ||||
Nominal Outer Diameter D | 68~159 | ±1.25%D | ±1%D | Nominal Outer Diameter D | 6~10 | ±0.20 | ±0.15 |
| ＞10~30 | ±0.30 | ±0.20 | |||||
| ＞30~50 | ±0.40 | ±0.30 | |||||
| ＞50~219 | ±0.85%D | ±0.75%D | |||||
| ＞159 | ±1.5%D | ＞219 | ±0.9%D | ±0.8%D | |||
Nominal Wall Thickness S | ＜15 | +15%S -12.5%S | ±12.5%S | Nominal Wall Thickness S | ≤3 | ±12%S | ±10%S |
| ≥15 | +20%S -15%S | ＞3 | +12.5%S -10%S | ±10%S | |||
Table2 The Tolerance of Minimum Wall Thickness Unit:mm
| Manufacturing Method | Diamension | Tolerance | |
| Ordinary Grade PA | High Grade PC | ||
Hot rolling(extrusion,expansion) steel tube W-H | Smin＜15 | +25%Smin 0 | +22.5%Smin 0 |
| Smin≥15 | +32.5%Smin 0 | ||
Cold drawn(rolling)steel tube W-C | All Wall Tickness | +22%Smin 0 | +20%Smin 0 |
Table 3 Grade and Chemical Component
| No. | GB/T 20878 | Grade | Chemical Component(Quality Fraction)/% | |||||||||||
| No. | Unified Digital Code | C | Si | Mn | P | S | Ni | Cr | Mo | Cu | N | Others | ||
| 1 | 13 | S30210 | 12Cr18Ni9 | 0.15 | 1.00 | 2.00 | 0.035 | 0.030 | 8.00~10.00 | 17.00~19.00 | - | - | 0.10 | - |
| 2 | 17 | S30408 | 06Cr19Ni10 | 0.08 | 1.00 | 2.00 | 0.035 | 0.030 | 8.00~11.00 | 18.00~20.00 | - | - | - | - |
| 3 | 18 | S30403 | 022Cr19Ni10 | 0.030 | 1.00 | 2.00 | 0.035 | 0.030 | 8.00~12.00 | 18.00~20.00 | - | - | - | - |
| 4 | 23 | S30458 | 06Cr19Ni10N | 0.08 | 1.00 | 2.00 | 0.035 | 0.030 | 8.00~11.00 | 18.00~20.00 | - | - | 0.10~0.16 | - |
| 5 | 24 | S30478 | 06Cr19Ni9NbN | 0.030 | 1.00 | 2.50 | 0.035 | 0.030 | 7.50~10.50 | 18.00~20.00 | - | - | 0.15~0.30 | Nb:0.15 |
| 6 | 25 | S30453 | 022Cr19Ni10N | 0.08 | 1.00 | 2.00 | 0.035 | 0.030 | 8.00~11.00 | 18.00~20.00 | - | - | 0.10~0.16 | - |
| 7 | 32 | S30908 | 06Cr23Ni13 | 0.030 | 1.00 | 2.00 | 0.035 | 0.030 | 12.00~15.00 | 22.00~24.00 | - | - | - | - |
| 8 | 35 | S31008 | 06Cr25Ni20 | 0.08 | 1.50 | 2.00 | 0.035 | 0.030 | 19.00~22.00 | 24.0~26.00 | - | - | - | - |
| 9 | 38 | S31608 | 06Cr17Ni12Mo2 | 0.08 | 1.00 | 2.00 | 0.035 | 0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | - |
| 10 | 39 | S31603 | 022Cr17Ni12Mo2 | 0.030 | 1.00 | 2.00 | 0.035 | 0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | - |
| 11 | 40 | S31609 | 07Cr17Ni12Mo2 | 0.04~0.10 | 1.00 | 2.00 | 0.035 | 0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | - |
| 12 | 41 | S31668 | 06Cr17Ni12Mo2Ti | 0.08 | 1.00 | 2.00 | 0.035 | 0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | Ti:5C~0.70 |
Table 4 Recommended Heat Treatment System,Steel Tube Mechanical Properties and Density
| Organization type | No. | GB/T 20878 | Grade | Recommended Heat Treatment System | Mechanical Properties | Density ρ/(kg/dm2) | |||
| No. | Unified digital code | Tensile strength Rm/MPa | Specified plastic elongation strength Rp0.2/MPa | Percentage elongation after fracture A/% | |||||
| Not less than | |||||||||
| Austenitic | 1 | 13 | S30210 | 12Cr18Ni9 | 1010℃~1150℃,cold or otherwise | 520 | 205 | 35 | 7.93 |
| 2 | 17 | S30408 | 06Cr19Ni10 | 1010℃~1150℃,cold or otherwise | 520 | 205 | 35 | 7.93 | |
| 3 | 18 | S30403 | 022Cr19Ni10 | 1010℃~1150℃,cold or otherwise | 480 | 175 | 35 | 7.90 | |
| 4 | 23 | S30458 | 06Cr19Ni10N | 1010℃~1150℃,cold or otherwise | 550 | 275 | 35 | 7.93 | |
| 5 | 24 | S30478 | 06Cr19Ni9NbN | 1010℃~1150℃,cold or otherwise | 685 | 345 | 35 | 7.98 | |
| 6 | 25 | S30453 | 022Cr19Ni10N | 1010℃~1150℃,cold or otherwise | 550 | 245 | 40 | 7.93 | |
| 7 | 32 | S30908 | 06Cr23Ni13 | 1010℃~1150℃,cold or otherwise | 520 | 205 | 40 | 7.98 | |
| 8 | 35 | S31008 | 06Cr25Ni20 | 1010℃~1150℃,cold or otherwise | 520 | 205 | 40 | 7.98 | |
| 9 | 38 | S31608 | 06Cr17Ni12Mo2 | 1010℃~1150℃,cold or otherwise | 520 | 205 | 35 | 8.00 | |
| 10 | 39 | S31603 | 022Cr17Ni12Mo2 | 1010℃~1150℃,cold or otherwise | 480 | 175 | 35 | 8.00 | |
| 11 | 40 | S31609 | 07Cr17Ni12Mo2 | ≥1040℃,cold or otherwise | 515 | 205 | 35 | 7.98 | |
| 12 | 41 | S31668 | 06Cr17Ni12Mo2Ti | 1000℃~1100℃,cold or otherwise | 530 | 205 | 35 | 7.90 | |
Table 5 Steel tube Inspection Item,Test Method and Sampling Quantity
| No. | Inspection Item | Sampling Quantity | Sampling Method | Test Method |
| 1 | Chemical Component | Take a sample of each furance | GB/T 20066 | GB/T 223,GB/T 11170,GB/T20123,GB/T 20124 |
| 2 | Tensile Test | Take a sample between two steel tubes of each batch | GB/T 2975 | GB/T 228.1 |
| 3 | Flattening Test | Take a sample between two steel tubes of each batch | GB/T 246 | GB/T 246 |
| 4 | Flaring Test | Take a sample between two steel tubes of each batch | GB/T 242 | GB/T 242 |
| 5 | Hydraulic Test | Each piece | - | GB/T 241 |
| 6 | Ultrasonic Test | Each piece | - | GB/T 5777-2008 |
| 7 | Eddy Test | Each piece | - | GB/T 7735-2004 |
| 8 | Intercrystalline corrosion test | Take a sample between two steel tubes of each batch | GB/T 4334-2008 | GB/T 4334-2008 |
Table A.1 Stainless Steel Grade Comparison
| No. | GB/T 20878-2007 | ASTM A 959-09 | JIS G4303-2005 JIS G 4311-1991 | ISO/TS 15510:2003 ISO 4955:2005 | EN 10088:1-2005 | ΓOCT 5632-1972 | |
| Unified Digital Code | Grade | ||||||
| 1 | S30210 | 12Cr18Ni9 | S30200,302 | SUS302 | X10CrNi18-8 | X10CrNi18-8,1.4310 | 12X18H9 |
| 2 | S30408 | 06Cr19Ni10 | S30400,304 | SUS304 | X5CrNi18-9 | X5CrNi18-10,1.4301 | - |
| 3 | S30403 | 022Cr19Ni10 | S30403,304L | SUS304L | X2CrNi19-11 | X2CrNi19-11,1.4306 | 03X18H11 |
| 4 | S30458 | 06Cr19Ni10N | S30451,304N | SUS304N1 | X5CrNiN18-8 | X5CrNiN19-9,1.4315 | - |
| 5 | S30478 | 06Cr19Ni9NbN | S30452,XM-21 | SUS304N2 | - | - | - |
| 6 | S30453 | 022Cr19Ni10N | S30453,304LN | SUS304LN | X2CrNiN18-9 | X2CrNiN18-10,1.4311 | - |
| 7 | S30908 | 06Cr23Ni13 | S30908,309S | SUS309S | X12CrNi23-13 | X12CrNi23-13,1.4833 | - |
| 8 | S31008 | 06Cr25Ni20 | S31008,310S | SUS310S | X8CrNi25-21 | X8CrNi25-21,1.4845 | 10X23H18 |
| 9 | S31608 | 06Cr17Ni12Mo2 | S31600,316 | SUS316 | X5CrNiMo17-12-2 | X5CrNiMo17-12-2,1.4401 | - |
| 10 | S31603 | 022Cr17Ni12Mo2 | S31603,316L | SUS316L | X2CrNiMo17-12-2 | X2CrNiMo17-12-2,1.4404 | 03X17H14M3 |
| 11 | S31609 | 07Cr17Ni12Mo2 | S31609,316H | - | - | X3CrNiMo17-13-3,1.4436 | - |
| 12 | S31668 | 06Cr17Ni12Mo2Ti | S31635,316Ti | SUS316Ti | X6CrNiMoTi17-12-2 | X6CrNiMoTi17-12-2,1.4571 | 08X17H13M2T |
Processing:W-H,W-C
Technical Delivery Conditions:Heat treatment and pickling or protective atmosphere heat treatment
Widely used in the field of:Fluid trasport
Product Images:
