Home Companies Shenzhen Bede Mold Co., Ltd

Nylon Mould Plastic Friction Puller Mold Parting Lock 20mm Blue Color

Active Member

Contact Us

[China]

Address: 8th Floor, Venture Building, Zhongxin Road,Xinqiao Street, Bao'an District, Shenzhen

Contact name:

Shenzhen Bede Mold Co., Ltd

Nylon Mould Plastic Friction Puller Mold Parting Lock 20mm Blue Color

Country/Region china
City & Province shenzhen guangdong
Categories Cast & Forged

Product Details

Nylon Materials Hardwearing Yellow Color φ18 Mould Parting Locks for Injection Molding

 

Description

  Nylon parting lock is regulated separation friction between the mold and the nylon sleeve by a locking screw conical member. It consists of a nylon sleeve and an alloy steel bolt. The nylon sleeve is available in white, yellow, red or blue.

 

Mounting method

   Parting locks makes the mold easy to remove. During the machining process, the friction between the mold and the resin is adjusted by tilting the screw, and the mold can be closed about 50,000 times by turning about 1/4 turn.

 

1. Embed the resin sleeve about 3 mm in the movable side of the die plate.
2. Create a hole on the fixed side of the die plate and finish it to reduce the internal surface roughness.
3. In order to maintain the mold parting locks’ durability, please make an R-chamfer instead of a C-chamfer on the inlet edge.
4. There is a PLBS bushing specially designed for being used with this parting lock can help to replace the R-chamfering and surface polishing processes. This kind of mold opening controller’s tapered bolt can be tightened or loosened to adjust the tension.

Quick Details

      The materials of the cone bolt is alloy steel, has excellent tensile strength and fatigue resistance, and the screw thread adopts international standards. The nylon sleeves are produced by PA66 and special additives, different colors have the different characteristics. 

 

materials of bolt alloy steelColorBlue
materials of sleevePA-66Sizeφ20
Performence Wear-resistantPackingplastic box or PE bags

 

   

Standard Size

Size DH/mmL/mmN/mmM/mm
φ182946138
φ202948168   10

 

Attention

   

1. The parting lock sleeve is made of special nylon material, which has good wear resistance and heat resistance. Although the heat resistance temperature of the nylon sleeve is 150 °C, in the actual use, due to the continuous locking stress of the tapered bolt The durability of the nylon sleeve is reduced, so it is generally used below 80 °C.

2. Do not add lubricant to the nylon casing.

 

Packing and Shipping

 

    The parting locks are packaged with plastic boxes or PE bags as the pictrue show,  and customized package is welcome.

     About the shipping, all the well-known express companies and ocean shipping can be selected, but in remote areas, we can only use EMS.

  

 

Hot Products

Yellow Color Wear-resistant φ12 Nylon Materials Parting Locks Precision Mold Components for ...
Yellow Color φ16 Nylon Materials Hardwearing Mould Parting Locks for Plastic Injection Molding ...
Mould Parting Locks Red Color φ20 Nylon 66 Materials Temperature Resistant for plastic Injection ...
Nylon Materials Hardwearing Yellow Color φ18 Mould Parting Locks for Injection Molding Description ...
Nylon Materials Hardwearing Yellow Color φ18 Mould Parting Locks for Injection Molding Description ...
Nylon Materials Hardwearing Yellow Color φ18 Mould Parting Locks for Injection Molding Description ...