Tolerance 0.005mm Precision Mold Parts Durable For Plastic Injection

^{1. Provide the detailed production schedule for each order.}

^{2. Offering production status with video and photos for each component.}

^{3. Manufacture the parts base on customers' drawings to meet the quality requirements and industry standard.}

^{4. Over 99% orders can meet the lead time requirement.}

^{5. Respond to the enquiry within 24 hours and offer the quotation within 48 hours.}

^{6. Using the first-rank raw materials which also can be traced.}

^{7. Provide the most competitive price with the high quality and service standard.}

^{8. The most reasonable packing scheme for all products.}

Toxmann Core Value And Culture:

^{Business Philosophy:}

^{1. Quality is the soul of an enterprise.}

^{2. Competitive price is our advantage.}

^{3. Enthusiastic service is our tenet.}

^{4. Innovation is our eternal pursuit}

^{Quality Objectives:}

^{1. Sample acceptance rate reaches 100%.}

^{2. The qualified rate of finished products reaches 100%}

^{3. Punctual delivery rate reaches 100%}

^{Our Mission:}

^{1.Strengthen management and continuously enhance satisfaction for customers, investors, suppliers and employees.}

^{2. Enhance innovation capacity and contribute to sustainable development.}

FAQ:

^{Q1: What are the parts of a plastic mold plate?
A: Such plates are present at the parting line and consist of bushings and guide pins. Core & Cavity: these are the shaped sections on either side of the three mold plates, which give the plastic product its final look. The design of the core & cavity is vital in the correct formation of the plastic product.}

^{Q2: What is core plate in mould?
A: Core plate- The core plate projects into the cavity place and creates hollow portions in the plastic component. This core plate is usually made of hardened hot die P20 steel without hardening after core machining.
What is the core side of a mold?
Sometimes called the “core,” it is the half of the mold where ejectors, side-action cams and other complex components are located. On a cosmetic part, the B-side usually creates the inside of the part.}

^{Q3: What is two plate mold?
A: Two-plate molds are the most commonly used type of injection molds. They consist of one parting plane where the mold splits. In a multi-cavity two-plate mold, runner and gate must be in the parting plane to ensure runner and gate ejection when mold split.}​