JinHang Precision Bearing Co.,Limited |
|
T6AR2262 M6CT2262 22x62x132mm Thrust Roller Bearing use for Food Extrudes Machine
Tandem bearing old code | Tandem bearing new code | Basic size unit(mm) | Basic load rating Unit (KN) | weight | material | |||
Inner dia | Outer dia | Height | Cr | Cor | kg | |||
T6AR2262 | M6CT2262 | 22 | 62 | 132 | 357 | 1450 | 2.1 | Steel chrome |
Tandem bearing 6 rows bearing catalogue
基本尺寸 | 基本额定负荷 | 重量 | 原代号 | 现代号 | |||
Principal dimensions | Basic load ratings | Weight | Old_spec | Designations | |||
动 | 静 | ||||||
d | D | H | dyc_Cr | stc_Cor | |||
mm | KN | kg | |||||
4 | 24 | 62 | 56 | 106 | 0.16 | T6AR424 | M6CT424 |
4 | 24 | 62 | 56 | 106 | 0.16 | T6AR424X1 | M6CT424X1 |
4 | 24 | 62 | 56 | 106 | 0.168 | T6AR424X1A | M6CT424X1A |
4 | 20 | 65 | 35 | 88 | 0.115 | T6AR420A | M6CT420A |
4 | 20 | 65 | 35 | 88 | 0.106 | T6AR420 | M6CT420 |
5 | 27 | 78 | 56 | 157 | 0.22 | T6AR527 | M6CT527 |
5 | 37 | 117 | 165 | 376 | T6AR537 | M6CT537 | |
6 | 30 | 89 | 66 | 218 | 0.321 | T6AR630 | M6CT630 |
12 | 42 | 125.7 | 154 | 534 | 0.9 | T6AR1242E | M6CT1242E |
14 | 52 | 151 | 386 | 1054 | 1.51 | T6AR1452A2E | M6CT1452A2E |
18 | 72 | 172 | 646 | 2286 | 3.51 | T6AR1872 | M6CT1872 |
18 | 72 | 172 | 646 | 2286 | 3.3 | T6AR1872X2 | M6CT1872X2 |
22 | 62 | 132 | 357 | 1450 | 2.1 | T6AR2262 | M6CT2262 |
22 | 64 | 154.5 | 276 | 1148 | 2.5 | T6AR2264 | M6CT2264 |
22 | 64 | 154.5 | 276 | 1148 | 3.52 | T6AR2264A | M6CT2264A |
22 | 64 | 154.5 | 279 | 1381 | 2.234 | T6AR2264E | M6CT2264E |
22 | 64 | 154.5 | 276 | 1148 | 3.52 | T6AR2264A | M6CT2264A |
22 | 70 | 180 | 513 | 1500 | 2.874 | T6AR2270A2 | M6CT2270A2 |
22 | 70 | 182 | 513 | 1500 | 2.874 | T6AR2270A2Y | M6CT2270A2Y |
23 | 90 | 213 | 828 | 3238 | 7.42 | T6AR2390A2 | M6CT2390A2 |
23 | 90 | 209.75 | 842 | 3181 | 7.75 | T6AR2390 | M6CT2390 |
Tandem bearings offer an optimum solution wherever the following
requirements apply:
■ small radial design envelope
■ high axial forces
■ long operating life
■ low frictional energy.
Tandem bearings have proven effective principally in gearboxes for
single and twin screw extruders in the rubber and plastics
industry.
Other possible applications include:
■ deep hole drilling equipment
■ friction welding machines.
Plastic extruder machine
Application of tandem bearings
When using tandem bearings, the following recommendations should be
adhered to:
1. Preload: 1% of the dynamic basic load rating. The dynamic basic
load rating of each tandem bearing . Figures not listed will be
provided by out institute on request.
2. Radial guidance: full complement cylindrical roller bearings or
needle roller bearings can be used.
3. Eliminate tilting: the supporting parts must be machined to
eliminate any tilting.
4. Mounting tolerances: recommended the following mounting
tolerances: shaft f6 and housing bore F7.
5. Lubrication: tandem bearings must always be lubricated by oil
circulation.
JinHang Precision bearing offer Tandem thrust
cylindrical roller Feed food extruder multi-stage bearings
T5AR36120 M5CT36120 36*120*197mm bearings have the characteristics
of small radial cross-sectional size, compact structure, large
axial load capacity, uniform load of each row of rollers, wear
resistance, low vibration noise and long life. They are parallel
twin screw extruders. Ideal screw spindle bearing.
The tandem bearing including two, three, four, five, six, seven or
eight rows of tandem bearings in the company's sample according to
the screw center distance, space and load size. The company also
accepts tandem bearings of sizes and structures other than the
sample.
Tandem Bearings Type
1. Basic Type: The bearing adopts elastic spacer to connect the
shaft washer,housing washer, roller and cage assembly. The
components of this Thrust Bearings are demountable. The user should
assemble or dismount the bearing meticulously according to our
guide book.
2. Shaft Type: The bearing is made by penetrating an axis through
the inner bore of basic type bearing and fastening the bearing to
the axis by locking collar/snap ring. The components of this type
bearing are inseparable. Shaft type tandem bearing is variational
structure of basic type.
3. Multi-stage cylindrical roller thrust bearing (sleeve type)
locking collar is made by covering a sleeve to the external of the
basic type multi-stage cylindrical roller thrust bearing. It is
also inseparable,and is assembled and disassembled as a whole.