Precise Lightning Strike Counter IP20 Protection Level Surge Arrester Counter

Lightning surge counter

Model: TRSS

Color: white / red

Verification: CE

Product description

  The lightning counter is used to record the number of lightning surges induced by the line in the installation environment. It is very effective for monitoring, recording, analyzing the local environment and taking more appropriate protective measures. The lightning strike counter can be used in conjunction with various lightning protection facilities, such as various lightning arresters, lightning arresters and lightning rods to detect the action of lightning protection equipment in the event of a lightning strike.

Product specifications

working principle

    The lightning counter is based on the AT89C51 single-chip microcomputer. It can detect and record the time of lightning strike and the lightning current intensity in real time. It can work through GPRS extended networking. The current sensor (Rogowski coil) senses the lightning current in real time, and converts the large current of the lightning strike into a low-voltage signal of 0~5V corresponding to it through an external integration circuit and an A/D conversion circuit, and is processed by the AT89C51 single-chip microcomputer through the interrupt mode. The processed data is displayed on the LCD and saved to the FLASH memory for query. At the same time, the time and date can be set by the button to ensure the accuracy of the record, and the history of the lightning strike can be queried by pressing the button. The lightning counter has a counting range of up to 99 times and can be repeatedly recorded. Powered by an external AC adapter

Use attention

  1. Insert the grounding wire at the end of the instrument and connect it to the ground before use. Pull the head telescopic pole out to the appropriate length before the power is turned on according to the height of the counter.

  2. After each click, the end of the discharge rod should leave the counter. If you need to repeat the test, do not release the button. When the indicator light flashes for 1-2 seconds, you can click the test again.

  3. Continuous testing will cause the calibrator to heat up, please pay attention to the appropriate gap time. To reduce malfunction and extend battery life

Company profile

    Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

FQA

Q: What advantages do you have?

A: We have been manufacturing and exporting SPD for more than 10 years !

We have CE and TUV certification

Q: Can I get some samples?

A: We support small quantity samples order ! please contact with our staff and leave your detail contact information , we will answer you within 24 hours

Q: How long does it take to deliver?

A: Fast delivery : 3~7days after payment

Q: Could you do OEM for us?

A: We have good experience on OEM service

Q: How long is your products warranty ?

A: 3 years warranty

Q: How to pay?

A: We accept T/T, Paypal, Western union, L/C, Trade Assurance